AUKUYEE CNC Shield Contoller Kits for 3D Printer, Includes CNC Shield V3.0,Nema 17 Stepper Motor, A4988 Stepper Motor Driver, Heat Sinks, Perfectly Compatible with GRBL
Product Description
AUKUYEE CNC Shield Contoller Kits for 3D Printer, Includes CNC Shield V3.0,Nema 17 Stepper Motor, A4988 Stepper Motor Driver, Heat Sinks, Perfectly Compatible with GRBL
- CNC Shield V3.0 Features - Latest Version 3.0, GRBL 0.8c compatible, 4 Axis supported and 2 end stops for each axis.
- Compact design - Stepper motors can be connected with 4 pin molex connectors or soldered in place.
- Stepper Drivers - Uses removable Pololu A4988 compatible stepper drivers, jumpers to set the Micro-Stepping for the stepper drivers
- Stepping Motor Included - Nema 17 model, holding torque of 26Ncm(36.8oz.in), 12V/0.4A and 1.8 deg.step angle(200 steps/rev)
- Technical support - Our technical support team is on standby to provide solutions to your questions, please feel free to contact us.
CNC Shield V3.0 features: Latest CNC Shield Version 3.0. GRBL 0.8c compatible.(Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals) 4-Axis support(X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13) 2 x End stops for each axis(6 in total), Spindle enable and direction Coolant enable Stepper drivers Uses removable Pololu A4988 compatible stepper drivers. Jumpers to set the Micro-Stepping for the stepper drivers. Compact design. Stepper Motors can be connected with 4 pin molex connectors or soldered in place. Runs on 12-36V DC. (At the moment only the Pololu DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.) Stepping Motor The most popular Nema 17 model with 1.8 deg. step angle (200 steps/revolution) 0.4A rated current/phase, allowing for a holding torque of 26Ncm(36.8oz.in) Connection:Black(A+), Green(A-), Red(B+), Blue(B-) Stepping Motor Specification: * Cable length: 11.8 inches * Phase Resistance: 30ohms * Inductance: 37mH+/-20%(1KHz) * Frame Size: 42 x 42mm * Body Length: 34mm * Shaft Diameter: 5mm * Front Shaft Length: 20mm * D-cut Length: 15mm * Number of Leads: 4 * Lead Length: 300mm * Weight: 230g Kit list: 1x CNC Shield V3.0 1x Keyestudio UNOR3 board 4x A4988 driver 1x USB cable 1x Nema 17 stepping motor
Technical Specifications
You might also like
STEPPERONLINE Nema 17 Stepper Motor Bipolar 2A 59Ncm(84oz.in) 48mm Body 4-lead W/ 1m Cable and Connector compatible with 3D Printer/CNC
eTopxizu 12v 30a Dc Universal Regulated Switching Power Supply 360w for CCTV, Radio, Computer Project
OctagonStar Flexible Couplings 5mm to 8mm NEMA 17 Shaft for RepRap 3D Printer or CNC Machine（2PCS）
URBEST AC 250V 5A SPDT 1NO 1NC Momentary Hinge Roller Lever Micro Switches 3 Pins 10 Pcs
ELEGOO 5 Sets 28BYJ-48 ULN2003 5V Stepper Motor + ULN2003 Driver Board for Arduino
BIQU A4988 Compatible Stepper StepStick Motor Diver Module with Heat Sink for 3D Printer Controller Ramps 1.4(Pack of 5pcs)
STEPPERONLINE 17HS13-0404S1 Stepper Motor for 3D Printer DIY CNC Robot, -10-50 Degree C, 0.4 Amp, Black
Stepper Motor Mounting Bracket, 3PCS Alloy Steel L Bracket for Nema 17 Stepper Motor with Screws and Inner Hexagon Spanner
2.54mm Standard Computer Jumper Caps 100pack by CorpCo
10 pcs 4-Flute End Mill Bits, AFUNTA 0.08" - 0.47" HSS CNC Straight Shank Drill Bits Cutter Tool Set for Wood Aluminum Steel Titanium