ELEGOO 5 Sets 28BYJ-48 ULN2003 5V Stepper Motor with ULN2003 Driver Board
Product Description
ELEGOO 5 Sets 28BYJ-48 ULN2003 5V Stepper Motor with ULN2003 Driver Board
- BUILD FIVE LOW-SPEED MOTION PROJECTS: Create clocks, gauges, rotating displays, feeder gates, vents and small robot mechanisms; five matched motor-and-driver sets support classroom builds, maker prototypes and spare replacements
- 5 V UNIPOLAR GEARED STEPPER MOTORS: Each 28BYJ-48 uses a 5-wire, 4-phase design with nominal 1:64 reduction for controlled low-speed movement in light-load positioning projects
- ULN2003 DRIVER BOARDS SIMPLIFY CONTROL: Connect control signals to IN1-IN4, power the motor through the driver board and use four onboard LEDs to view the active coil sequence during setup and testing
- SET UP FOR SMOOTHER ROTATION: Use a regulated 5 V supply with sufficient current, connect controller and motor-supply grounds together, verify the motor plug and IN1-IN4 sequence, and reduce speed if the shaft buzzes or vibrates
- FIVE COMPLETE MOTOR-DRIVER SETS: Includes 5 × 28BYJ-48 stepper motors, 5 × ULN2003 driver boards and 10 × female-to-male jumper wires for multiple prototypes and replacement builds
Elegoo Inc. is a professional manufacturer and exporter that is concerned with the design, development production and marketing of arduino, 3d printers, raspberry pi and STM32.
Our Dream is to make the best price and best quality produce for customers.
So we would like to receive your valuable suggestions for our products and we can improve them for you.
Features:
- A, B, C, D four-phase LED indicates the status of the stepper motor work.
- Stepper motor with a standard interface, when used directly pluggable.
- 5 line 4 phase can be used for ordinary ULN2003 chip driver, connect to the 2 phase , support the development board，With convenient use, direct docking
- Rated Voltage: DC5V 4-phase
- Insulation Resistance: >10MΩ (500V)
- Dielectric Strength: 600V AC / 1mA / 1s
- Step angle: 5.625 x 1/64
- DC Resistance: 200Ω±7% (25C)
- Reduction ratio: 1/64
- Insulation Grade: A
- No-load Pull in Frequency: >600Hz
- No-load Pull out Frequency: >1000Hz
- Pull in Torque: >34.3mN.m(120Hz)
- Detent Torque: >34.3mN.m
- Temperature Rise: 《40K(120Hz)
Package including:
5 set Uln2003 Stepper Motor + Driver Board
10pcs female to male cable ( as a gift)
Technical Specifications
You might also like
Elegoo EL-CP-004 120pcs Multicolored Dupont Wire 40pin Male to Female, 40pin Male to Male, 40pin Female to Female Breadboard Jumper Wires Ribbon Cables Kit for arduino
ELEGOO UNO R3 Board ATmega328P ATMEGA16U2 with USB Cable Compatible with Arduino IDE Projects, RoHS Compliant
ELEGOO MEGA 2560 R3 Board ATmega2560 ATMEGA16U2 + USB Cable Compatible with Arduino IDE, RoHS Compliant
ELEGOO Upgraded 37 in 1 Sensor Modules Kit with Tutorial Compatible with Arduino IDE UNO R3 MEGA2560 Nano
Miuzei 10 pcs SG90 9G Servo Motor Kit for RC Robot Arm Helicopter Airplane Remote Control
STEPPERONLINE Nema 17 Stepper Motor Bipolar 2A 59Ncm(84oz.in) 48mm Body 4-lead W/ 1m Cable and Connector compatible with 3D Printer/CNC
ELEGOO Stepstick Stepper Motor Driver Module A4988 + Heat Sink for 3D Printer Reprap, CNC Machine or Robotics(Pack of 5)
Smraza 10 Pcs SG90 9G Micro Servo Motor Kit for RC Robot Arm/Hand/Walking Helicopter Airplane Car Boat Control with Cable, Mini Servos Arduino Project
ELEGOO for Arduino Nano V3.0, Nano Board CH340/ATmega328P Without USB Cable, Compatible with Arduino Nano V3.0 (Nano x 3 Without Cable)
LAFVIN Nano V3.0, Nano Board ATmega328P 5V 16M Micro-Controller Board Compatible with Arduino IDE (Nano x 3 with USB Cable)