ELEGOO Nano Boards V3.0, ATmega328P CH340, 3-Pack, Compatible with Arduino
Product Description
ELEGOO Nano Boards V3.0, ATmega328P CH340, 3-Pack, Compatible with Arduino
- THREE COMPACT BOARDS FOR MORE PROJECTS - Build a sensor node, LED controller and data logger at the same time, give each STEM team its own controller or embed one board in a finished prototype while keeping two available for testing and future ideas
- ATMEGA328P POWER IN A BREADBOARD-FRIENDLY SIZE - Each 5 V 16 MHz AVR board provides 32 KB flash, 2 KB SRAM, 1 KB EEPROM, 14 digital I/O pins, 6 PWM outputs and 8 analog inputs for buttons, displays, sensors, motors and serial communication projects
- CH340 MINI-B USB PROGRAMMING - Install the CH340 driver when required, select the correct board, processor and serial port in the IDE and use a Mini-B cable that supports data, not a charge-only lead; USB cables are not included in this 3-pack
- LOOSE HEADERS FOR FLEXIBLE BUILDS - Solder the included pin headers for breadboard use or integrate the compact board into a permanent prototype; soldering tools, breadboard and jumper wires are not included
- CHECK POWER AND BOARD TYPE BEFORE CONNECTING - Power through Mini-B USB, regulated 5 V or the recommended VIN range, share ground with external circuits and confirm pin voltage limits; this classic Nano V3.0 has no built-in Wi-Fi, Bluetooth, USB-C or battery charging
The Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x). It has more or less the same functionality of the Arduino/Genuino UNO, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one.
You could download the driver of Elegoo Nano V3.0 at: http://bit.ly/2pMF4in
Technical specs
Microcontroller: ATmega328
Architecture: AVR
Operating Voltage: 5 V\
Flash Memory: 32 KB of which 2 KB used by bootloader
SRAM: 2 KB
Clock Speed: 16 MHz
Analog I/O Pins: 8
EEPROM: 1 KB
DC Current per I/O Pins: 40 mA (I/O Pins)
Input Voltage: 7-12 V
Digital I/O Pins: 22
PWM Output: 6
Power Consumption: 19 mA
PCB Size: 18 x 45 mm
Weight: 7 g
Package Include :
3 X Nano Board
ATTENTION:
We dont have USB cables in this kit and you will need to buy a mini USB cable to use this NANO board.
Technical Specifications
You might also like
ELEGOO 32 Pcs Double Sided PCB Board Prototype Kit for DIY Soldering with 5 Sizes Compatible with Arduino Kits
Elegoo EL-CP-004 120pcs Multicolored Dupont Wire 40pin Male to Female, 40pin Male to Male, 40pin Female to Female Breadboard Jumper Wires Ribbon Cables Kit for arduino
ELEGOO UNO R3 Board ATmega328P ATMEGA16U2 with USB Cable Compatible with Arduino IDE Projects, RoHS Compliant
ELEGOO MEGA 2560 R3 Board ATmega2560 ATMEGA16U2 + USB Cable Compatible with Arduino IDE, RoHS Compliant
HiLetgo 5pcs Micro SD TF Card Adater Reader Module 6Pin SPI Interface Driver Module with chip Level Conversion for Arduino UNO R3 MEGA 2560 Due
Makerfire 10pcs Arduino NRF24L01+ 2.4GHz Wireless RF Transceiver Module New
Gikfun 5mm 940nm LEDs Infrared Emitter and IR Receiver Diode for Arduino (Pack of 20pcs) EK8443
EDGELEC 120pcs Breadboard Jumper Wires 10cm 15cm 20cm 30cm 40cm 50cm 100cm Optional Arduino Wire Dupont Cable Assorted Kit Male to Female Male to Male Female to Female Multicolored Ribbon Cables
ELEGOO 5 Sets 28BYJ-48 ULN2003 5V Stepper Motor + ULN2003 Driver Board for Arduino
4PCS Breadboards Kit Include 2PCS 830 Point 2PCS 400 Point Solderless Breadboards for Arduino Proto Shield Distribution Connecting Blocks