NANPU 3/8" NPT Air Filter Regulator Lubricator Combo, Water Separator
Product Description
NANPU 3/8" NPT Air Filter Regulator Lubricator Combo, Water Separator
- COMPLETE FRL AIR PREP - Compressed air filter regulator lubricator combo combines air filtration, pressure control and tool lubrication in one compact unit for compressor lines and pneumatic tools.
- 5-MICRON BRASS FILTER ELEMENT - Helps reduce moisture, oil contaminants and solid particles; brass element offers excellent filtering performance, longer service life and reusable cleaning potential.
- 0-125 PSI OPERATING PRESSURE - Adjustable regulator with 0-150 psi gauge helps set and monitor outlet pressure; 60 SCFM flow rate, 1700 L/min at 90 psi, supports common shop air tools.
- SEMI-AUTO DRAIN & PROTECTED BOWL - Polycarbonate bowl with metal guard helps improve impact protection and makes water/oil buildup easier to check during routine maintenance.
- INSTALLATION KIT INCLUDED - Includes bracket, a pair of air coupler and plug kit, 2 x 3/8" NPT fittings and thread seal tape. Model reference: NANPU AC3010-03; install upright and follow the IN/OUT arrow.
Installation and Operating:
1. Please cleaning the port and fitting before installing, avoiding bringing dirty thing to the air path.
2. Pay attention to direction of air flow and arrow pointing on body if match, minding port and tooth type if correct.
3. Adjustment of pressure: Pull up the knob of adjustment of pressure up, clockwise rotation, pressure is rising. Anticlockwise rotation, pressure is down. Watch the air gauge and point range and adjust the required pressure, then press the button to the lock status.
4. Water bowl excretion. When it is no air pressure, water bowl will automatic excrete. When it has air pressure, the drainage column will rise. Water bowl excreted, releasing the drainage column after drainage finished, then drainage column will automatic rebound, drainage ended. When the water level is beyond upper limit, please drainage. Otherwise that will cause poor dehumidification.
5. Adjustable oil: Clockwise rotated needle valve, oil dropped will reduce. Anticlockwise rotated needle valve, oil dropped will increase. After adjusted air flow and set needle valve, air flow and oil dropped will increase, air flow and oil dropped will reduce.
6. Refueling method: You can open air path then refueling oil. Anticlockwise rotates refueling screw, refueling capacity does not exceed 80% of bowl. After refueling, please lock refueling screw.
Notice:
Please be careful to use a wrench to tighten the fitting.
The first installation may have an excretion reaction(Not leakage, for the first time the internal pressure is different from the outside, it is necessary to discharge the excess air first). In this case, please wait for a while.
Technical Specifications
You might also like
Goodyear 3' x 3/8" Rubber Whip Hose Yellow 250 Psi
ColorFit by Milton Coupler & Plug Kit - (M-Style, Red) - 1/4" NPT, (14-Piece)
Lucas Oil 10216 16 Ounce Air Tool Lubricant
Nigo Brass Pipe Fitting, Hex Bushing (3 Pack, 3/8" NPT Male x 1/4" NPT Female)
NANPU ARF2000 1/4" NPT Compressed Air Filter Regulator Combo Piggyback, 5 Micron Element, Poly Bowl, Semi-Auto Drain, Bracket, Gauge
NANPU DFR-03 3/8" NPT Air Drying System - Double Air Filters, Air Pressure Regulator Combo - Semi-Auto Drain, Poly Bowl
Install Bay BCC12 1/2-Inch Cable Clamp, Black (100-Pack)
TACKLIFE Heat Gun 1500W 122℉~1022℉(50℃~550℃) - Adjustable 3 Temp/Flow-settings, Unique Cooling Mode, 4 Nozzle Attachments(Working Time Over 500 Hrs) - HGP70AC
Hromee Hybrid Rubber & PVC Lead-in Air Hose 3/8 Inch x 6FT with Solid Brass 1/4" Industrial NPT Quick Coupler and Plug 300PSI Yellow Whip Air Compressor Hose
NANPU AW2000-02 1/4" NPT Compressed Air Filter Regulator Combo Piggyback, 5 Micron Element, Poly Bowl, Semi-Auto Drain, Bracket, 0-150 psi Gauge