NANPU 1/4" NPT Air Compressor Filter & Pressure Regulator Combo w/Gauge
Product Description
NANPU 1/4" NPT Air Compressor Filter & Pressure Regulator Combo w/Gauge
- 1/4" NPT Semi-Auto Drain FILTER + REGULATOR COMBO — removes water, oil and dust from your compressed air line to protect pneumatic tools, air compressor and spray equipment.
- 5 MICRON BRASS FILTER ELEMENT for excellent, long-life filtration and reuse; accurate, stable air pressure regulation with an easy pull-to-lock adjustment knob and clear water separator bowl.
- SPECS: max supply pressure 145 psi; operating pressure 0-145 psi; temperature range 41-140°F (5-60°C).
- HIGH FLOW RATE: 20 SCFM (550 L/min) @ 90 psi — correctly sized for airbrush, spray guns & small air tools.
- INCLUDES: polycarbonate bowl, 0-150 psi gauge, sturdy metal mounting bracket, a pair of air coupler & plug kit, 2 x 1/4" NPT fittings and thread seal tape.
Installation and Operating:
1. Please cleaning the port and fitting before installing, avoiding bringing dirty thing to the air path.
2. Pay attention to direction of air flow and arrow pointing on body if match, minding port and tooth type if correct.
3. Adjustment of pressure: Pull up the knob of adjustment of pressure up, clockwise rotation, pressure is rising. Anticlockwise rotation, pressure is down. Watch the air gauge and point range and adjust the required pressure, then press the button to the lock status.
4. Water bowl excretion. When it is no air pressure, water bowl will automatic excrete. When it has air pressure, the drainage column will rise. Water bowl excreted, releasing the drainage column after drainage finished, then drainage column will automatic rebound, drainage ended. When the water level is beyond upper limit, please drainage. Otherwise that will cause poor dehumidification.
Notice:
Please be careful to use a wrench to tighten the fitting. It is normal if there are extra threads, you can feel free to use.
The first installation may have an excretion reaction(Not leakage, for the first time the internal pressure is different from the outside, it is necessary to discharge the excess air first. In this case, please wait for a while.
Technical Specifications
You might also like
TEKTON 46362 1/2-Inch I.D. by 3-Foot 250 PSI Rubber Lead-In Air Hose with 1/2-Inch NPT Male Ends
NANPU ARF2000 1/4" NPT Compressed Air Filter Regulator Combo Piggyback, 5 Micron Element, Poly Bowl, Semi-Auto Drain, Bracket, Gauge
Tailonz Pneumatic 5 Way Pneumatic Air Hand Lever Valve 2 Position Operated Valve Solenoid Valve Port 1/4 PT Manual Control Push Pull Valves 4H210-08
Primefit PCKIT26 Air Piping System, 26-Piece Air Push To Connect Kit with 1/2-Inch (OD) / 3/8" (ID) x 100-Feet TPEE Tubing
Goodyear 3' x 3/8" Rubber Whip Hose Yellow 250 Psi
Tailonz Pneumatic 1/4 Inch od Push to Connect Fittings Pneumatic Fittings Kit 10 Spliters+10 Elbows+10 tee+10 Straight (40 pcs)
WYNNsky Air Hose Fittings, AMT Universal Air Coupler and I/M Industrial Type Air Plug Kit, 1/4 Inch Threads Size, 1/4 Inch Body Size, 14 Pieces Air Compressor Accessories Fittings Kit
Maxline M3800 Master Kit, 1/2-Inch x 100-Feet
SUNGATOR Brass Pipe Fitting, Adapter, 1/8" Male Pipe x 1/4" Female Pipe (2-Pack)
Maxline M8010 Equal Tee Fitting for 1/2-Inch Tubing