U.S. Solid 1/4 in Motorized Ball Valve, NSF Certified 304 Stainless Steel Electric Valve, Normally Closed, 9-24V AC/DC, 2-Wire Auto Return, Full Port
Product Description
U.S. Solid 1/4 in Motorized Ball Valve, NSF Certified 304 Stainless Steel Electric Valve, Normally Closed, 9-24V AC/DC, 2-Wire Auto Return, Full Port
- NSF CERTIFIED 304 STAINLESS STEEL: Built with NSF Certified lead-free 304 stainless steel metal components that resist corrosion and ensure safe drinking water for potable water lines, home brewing, and food-grade fluid transfer
- FULL PORT AND HIGH PRESSURE: Full-port bore with an 8 mm flow aperture matches pipe size for unrestricted flow; PTFE seats and silicone seals handle working pressures up to 1.0 MPa (145 psi) through a compact 1/4 in NPT body
- WIDE 9-24 V AC/DC OPERATION: Compatible with AC or DC power across 9-24 V; opens or closes in 3 to 5 seconds, and an internal limit switch cuts power at end of travel to eliminate heat buildup and lower energy consumption
- 2-WIRE AUTO RETURN NORMALLY CLOSED: Simple 2-wire hookup drives the valve open when energized and automatically returns it to the closed position the moment power is cut for reliable automated line isolation
- IP65 RATED SOLENOID ALTERNATIVE: IP65 enclosure seals against dust and water spray; rated for 80,000 to 100,000 cycles with zero holding current to stay cool during long runs in irrigation, HVAC, and RV plumbing
This 1/4'' stainless steel motorized ball valve from U.S. Solid comes in a water safe stainless steel. It is a great option for the DIY project, but strong enough for big businesses. The stem and body of the valve are comprised of SS304 stainless steel, which is safe for drinking water. This is key, since many people use these valves in their home water systems.
The valve actuates with 9-24V of AC or DC power. When energized, it will open fully in 3-5 seconds. Since this valve is a normally closed (N/C) ball valve, it will automatically return to a closed position when the power source is eliminated. When fully opened, a limit switch keeps the amount of power used by the valve to a miniscule levels. This makes it a much more environmentally friendly option than most solenoid valves. Most solenoid valves are fully energized when opened, which can lead to problems and overheating when run continuously. This valve draws such low levels of power once fully opened that it can be run continuously and never overheat.
The stem on this valve comes with a robust torque rating of 2 N m. This is important, though often overlooked. The stem is a frequent point of failure for valves, and having a strong stem helps to ensure a lifetime of quality performance.
There are many different potential uses for this motorized ball valve. While not quick acting, it is sturdy and resilient once energized. They can also work effectively even with gravity flow operations, such as those used in some auxiliary fuel tank setups.
Specifications
Valve Material: SS304
Ball Seat: PTFE
Seal: EPDM
Close/Open Time: 3-5 Seconds
Working Voltage: 9-24V AC/DC
Max Power: 2W
Max Torque: 2 N m
Max Pressure: 1.0Mpa
Temperature range for Flow Medium: 0°C to 90°C
Ambient Temperature Range: -10°C to 40°C
Enclosure Rating: IP65
Life Expectancy: 80,000-100,000 Cycles
Bore Type: Full
Thread Type: NPT









