U.S. Solid 1/4" Motorized Ball Valve, 9-24V AC/DC, NSF Certified 304SS Electrical Ball Valve with Full Port, and 3 Wire Setup
Product Description
U.S. Solid 1/4" Motorized Ball Valve, 9-24V AC/DC, NSF Certified 304SS Electrical Ball Valve with Full Port, and 3 Wire Setup
- NSF CERTIFIED 304 STAINLESS STEEL: The metal components are NSF Certified 304 stainless steel that resists corrosion and is safe for drinking water; a lead-free path for potable water and general fluid lines
- 9-24 V AC/DC ACTUATION: Runs on 9 to 24 V AC/DC at 2 W and drives fully open or closed in 3 to 5 seconds with 2 Nm of torque; the motor draws power only while moving, so its low power draw after positioning limits heat buildup
- 3-WIRE DUAL-POINT CONTROL: A 3-wire hookup with a shared common wire; power one wire to drive the valve open and the other to drive it closed, and it holds its last position whenever power is disconnected, so it needs no power to stay put
- IP65 RATED ENCLOSURE: The IP65-rated housing seals out dust and low-pressure water spray from every direction, while PTFE and silicone seals and a rated 80,000 to 100,000 cycle service life keep the valve reliable
- FULL PORT SOLENOID ALTERNATIVE: Unlike a solenoid that stays energized, this compact 1/4 in NPT full-port ball valve draws power only while moving; suited to home water lines, HVAC, irrigation, and Arduino automation
This ¼" stainless steel motorized ball valve is affordable enough for the home hobbyist, while durable enough for titans of industry. The valve body and stem are made of SS304 steel, which is lead free and safe for drinking water. It actuates using 9V to 24V of AC or DC power, and will fully open or fully close in 3-5 seconds. Once in position, it automatically stops using energy. This is important as it will never overheat.This is a key difference between motorized ball valves and solenoid valves. Most solenoid valves are constantly energized, while these electrical ball valves are not, making them a safer and more eco-friendly option.
The attention to detail in this valve extends beyond the metal. The casing is rated as IP65. This ingress protection rating is used to define how well the casing does at sealing. For U.S. Solid motorized ball valves, they have the highest IP rating possible against solids (6), representing a seal that protects against all solids, even dust. For water, the rating (5) represents seal protection against water spray from all directions. This means the casing and body are all built to last.
Motorized ball valves have a variety of interesting and convenient uses. Many choose to use them in home water systems. They are also a great tool for use in home automation projects. Home brewery systems typically need several of these valves, and the SS304 is great for fermented liquids. Lastly, all of the U.S. Solid motorized ball valves work well with Arduino automation systems.
Specifications
Valve Material: SS304
Ball Seat: PTFE
Seal: EPDM
Close/Open Time: 3-5 Seconds
Working Voltage: 9-24V AC/DC
Max Power: 2W
Max Torque: 2 N m
Max Pressure: 1.0Mpa
Temperature range for Flow Medium: 0°C to 90°C
Ambient Temperature Range: -10°C to 40°C
Enclosure Rating: IP65
Life Expectancy: 80,000-100,000 Cycles
Bore Type: Standard
Thread Type: NPT
