waveshare 2.13inch Touch e-Paper Display with ABS Case, 250x122 Pixels E-Ink Display for Raspberry Pi Zero 2 W/Raspberry Pi Zero W/Pi Zero WH, Support Partial Refresh

waveshare 2.13inch Touch e-Paper Display with ABS Case, 250x122 Pixels E-Ink Display for Raspberry Pi Zero 2 W/Raspberry Pi Zero W/Pi Zero WH, Support Partial Refresh

Product ID: B09Q6LKX77 Condition: New

$ 131
includes Duties & VAT
Delivery: 10-20 working days
Ships from USA warehouse.
Secure Transaction
VISA Mastercard ozow

Product Description

waveshare 2.13inch Touch e-Paper Display with ABS Case, 250x122 Pixels E-Ink Display for Raspberry Pi Zero 2 W/Raspberry Pi Zero W/Pi Zero WH, Support Partial Refresh

  • 2.13inch Touch e-Paper HAT with ABS case,2.13inch capacitive touch e-Paper display, 5-point touch. Resolution: 250×122 pixels. Display color: black, white. Greyscale: 2. Partial refresh time: 0.3s. Full refresh time: 2s. Refresh power: 26.4mW(typ.). Touchpoints: 5 (MAX). Touch type: Capacitive touch. Touch interfaced: I2C. Touch panel: Toughened Glass .
  • Outline dimensions(Module): 69.15 × 38.90mm. Outline dimensions(Driver Board): 59.51mm × 34.00mm. Display area: 48.55mm × 23.71mm. Operating Voltage: 3.3V (V1.1 support 5V). Communication interface: SPI. Dot pitch: 0.194 × 0.194mm .
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi Zero / Zero W. Supports waken up by user-defined gesture.
  • No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing.

Technical Specifications

Country
USA
Brand
waveshare
Manufacturer
Waveshare
Binding
Personal Computers
PartNumber
2.13 Touch E-Ink with Enclosure-A
Model
2.13 Touch E-Ink with Enclosure-A
Color
2.13inch Touch e-Paper with ABS Case
Height
0.732282
Length
2.842514
Width
1.65354