uxcell Drill Press Return Spring, 3.3Ft Long, 41 x 8 x 0.8mm
Product Description
uxcell Drill Press Return Spring, 3.3Ft Long, 41 x 8 x 0.8mm
- Expand Length : 1000mm/39.4inch ; Spring OD : 41mm ; Material Width : 8mm ; Material Thickness : 0.8mm
- Inner Mounting Type : Hook; Outer Mounting Type : Hook
- This is the chrome housed spring that returns the quill to the top after you have completed drilling.Used to all kinds of vacuum cleaner coil spring, volume tube coil spring, safe coil spring and so on
- Chemical Blackening, the performance of the product form oxide film, isolate the air, prevent rust
- Pay attention to safe when installing springs. Do not loosen the wire of fixed springs!
Specification:
Material : Spring Steel (60Si2Mn)
Finish : Chemical Blackening
Material Thickness : 0.8mm
Material Width : 8mm
Spring OD : 40mm
Expand Length : 1000mm/39.4inch
Inner Mounting Type : Hook
Outer Mounting Type : Hook
Package Content :
1 x Drill Press Spring
Description:
1.The drill press quill return spring is good replacement for many existing quill spring drill presses, this is the chrome housed spring that returns the quill to the top after you have completed drilling.Used to all kinds of vacuum cleaner coil spring, volume tube coil spring, safe coil spring and so on.
2.Chemical Blackening, the performance of the product form oxide film, isolate the air, prevent rust.
3.Pay attention to safe when installing springs. Do not loosen the wire of fixed springs! When installing, install the spring with a fixed wire directly into the spring , and the wire will slide out.
