iShoot Foldable Long Focus Lens Support, Portable Telephoto Lens Bracket, Zoom Lens Stand, 2-in1 Camera Quick Release Plate Compatible with Manfrotto 200PL & Arca-Swiss Fit Tripod Ball Head Clamp

iShoot Foldable Long Focus Lens Support, Portable Telephoto Lens Bracket, Zoom Lens Stand, 2-in1 Camera Quick Release Plate Compatible with Manfrotto 200PL & Arca-Swiss Fit Tripod Ball Head Clamp

• 1. The minimum installation distance from the camera bottom plate to the lens collar bottom plate is about 5cm, suitable for various lens collars; the long-focus lens support can protect the bayonet of the lens after being installed between the camera and the lens;
• 2. The quick release plate of the telephoto lens bracket adopts 2-in-1 design, compatible with ARCA-SWISS / RRS fit tripod head clamp, and compatible with Manfrotto 200PL structure as well;
• 3. The long-focus lens support can be used with some ball heads and 2D heads of ARCA-SWISS & RRS fit, compatible with Manfrotto 308RC / 352RC, 322RC2 / 324RC2 / 327RC2, 468RC2 / 486RC2 / 488RC2 / 490RC2 / 494RC2 / 496RC2 / 498RC2, MH490BH / MH494BH / MH496BH, MHXPROQ2, MH054M0-Q2 as well; it cannot be used with 3D tripod head or hydraulic head;
• 4. The redesigned long-focus lens support IS-TB03 has a net weight of about 215g and a fully stretched length of about 19.5cm. The distance between the screw holes at both ends is about 17cm. After being folded, it is about 8.5cm long, 9cm wide and 4cm high; multi-point rubber pads are used on the contact surface; it adopts three movable joints; Only the second joint can be locked;
• 5. Compatible with Canon Lens: RF 70-200mm f/2.8L IS USM; 100mm f/2.8L Macro IS USM; 100-500mm f/4.5-7.1L IS USM; EF 70-200mm f/2.8L IS USM series; 70-200mm f/4L IS USM series; 80-200mm f/2.8L; 100mm f/2.8L IS USM MACRO; 180mm f/3.5L USM MACRO; 200mm f/2L IS USM; 200mm f/2.8LII USM; 300mm f/4L IS USM; 100-400m f/4-5.6L IS USM series; EF 400mm f/5.6L IS USM.