for Raspberry Pi Pico, ESP32-S2 MCU WiFi Development Board with 0.96inch 160 x 80 IPS LCD Display LCD, 240MHz, 2.4 GHz WiFi, 26 x Multi-Function GPIO Pins

for Raspberry Pi Pico, ESP32-S2 MCU WiFi Development Board with 0.96inch 160 x 80 IPS LCD Display LCD, 240MHz, 2.4 GHz WiFi, 26 x Multi-Function GPIO Pins

• ESP32-S2 MCU WiFi Development Board with 0.96inch LCD,Support Raspberry Pi Pico expansion board. On-board 0.96inch 160×80 pixels 65K color IPS LCD display. On-board single 3.7V lithium battery charge/discharge header, suitable for mobile IoT product design.
• Equipped with hardware crypto accelerator, RNG, HMAC and Digital Signature module, it can meet the security requirements of the Internet of Things. Multiple low-power operating states to satisfy power requirements in IoT, mobile devices, wearable electronics, smart home and other application scenarios, etc.
• Xtensa single-core 32-bit LX7 microprocessor, ESP32-S2FH4, support clock frequency up to 240 MHz. Integrated 320KB SRAM, 128KB ROM, 8MB PSRAM, 4MB Flash memory. Support IEEE802.11 b/g/n, on-board 2.4 GHz WiFi ceramic antenna, up to 150 Mbps data transfer rate.
• USB-C connector, no more plug orientation problem. On-chip integrated full-speed USB OTG interface, LCD interface (8-bit serial RGB/8080/6800), TWAI controller (ISO11898-1 compatible), capacitive sensor GPIO, temperature sensor and RMT (TX/RX). Onboard DC-DC chip MP28164, high efficiency DC-DC buck-boost chip, maximum 2A load current.
• 26 x multi-function GPIO pins:configurable pin function, allows flexible development and integration. Support C/C++, MicroPython, CircuitPython.Comprehensive SDK, dev resources, tutorials to help you easily get started.