Zachager 211-1010-002 | 211-1010 | 150N0028 | 101-1-160-F | Hydraulic Steering Valve Motor | Direct Replacement for Eaton Char-Lynn 3 6 12 Series | Cast Iron High Torque | 4-Hole Flange |

Zachager 211-1010-002 | 211-1010 | 150N0028 | 101-1-160-F | Hydraulic Steering Valve Motor | Direct Replacement for Eaton Char-Lynn 3 6 12 Series | Cast Iron High Torque | 4-Hole Flange |

• 【OE Exact Match & Wide Compatibility 】 OE Part Numbers: 211-1010-002 211-1010 150N0028 101-1-160. 1:1 exact match for Eaton Char-Lynn 3 6 12 Series, no modifications needed—direct drop-in replacement, no mismatch hassle.
• 【Industrial-Grade Durability 】 Industrial-grade durability: high-strength forged steel housing, precision internal components, withstands extreme temperatures and heavy use. Sealed design prevents leakage/dust, service life 30% longer than ordinary motors.
• 【High Volumetric Efficiency & Anti-Heat Degradation Design】Equipped with an advanced gear ring structure, it boasts a volumetric efficiency of up to 96%, resulting in extremely low energy loss. Even under continuous high-load conditions (such as zero-turn lawnmowers and snowplows), it maintains stable torque and controllable temperature rise, preventing power decay or seal failure due to overheating, significantly reducing equipment downtime.
• 【Leak-Free Design & All-Weather Durability】 The housing is made of precision cast iron in one piece, with a black anti-rust paint coating for corrosion resistance and impact resistance. SAE O-ring seals with dust caps are standard at the inlet and outlet, completely eliminating external leakage. Each motor undergoes 100% pressure testing before leaving the factory to ensure leak-free operation under harsh conditions.
• 【Professional Installation Guide (Must Read)】⚠️ Before installation, please verify that your equipment part number matches this motor. If in doubt, please send us your model number or original factory code, and we will confirm it for you. Before connecting the new motor, thoroughly flush the hydraulic lines to remove impurities or water from the old oil. Apply clean hydraulic oil to the O-rings; tighten the connections and then lock them to the manufacturer's specified torque. It is strongly recommended to replace the hydraulic oil filter and fluid simultaneously, which can extend motor life by more than 30%.