Yuuhseel RD24 Multifunctional DC12V Timer Delay Relay Module 10A with Digital Display Red LED Time Delay Switch ON-Off

Yuuhseel RD24 Multifunctional DC12V Timer Delay Relay Module 10A with Digital Display Red LED Time Delay Switch ON-Off

• Operating Voltage: 12V, Function: Multi-mode functions (delay off, delay on, cyclic on-off)
• P00: Timed Off: The relay is immediately turned on after power on, and the countdown starts according to the set time, after the time is 0, the relay is disconnected. The relay remains disconnected until the input power is cut off.
• P01: Timed On: The relay stays inactive after power on, and the countdown starts according to the set time, after the time is 0, the relay is connected. The relay remains connected until the input power is cut off.
• P02: Cycle Mode: Cycle sequence after power-on: ON → Delay → OFF → Delay (loop continuously). The ON and OFF durations are identical.
• P03: Cycle Mode: Cycle sequence after power-on: Delay → ON → Delay → OFF (loop continuously). The ON and OFF durations are identical.
• How to adjust the time? In the display time state, press 【 K1 】 to move the cursor left and right, and press 【 K2 】 to adjust the number at the cursor upwards. Adjusting the numbers will take effect immediately.
• How to switch modes? In the stopped state, long press 【 K1 】 (about 1 second) to enter the mode setting, press 【 K2 】 to switch modes, and press 【 K1 】 again to end the mode setting and enter the automatic screen off mode.
• How to switch the position of the decimal point? Long press 【 K2 】 (about 1 second) to switch the position of the decimal point. Example of decimal point position: 000 represents a range of 0-999 seconds, 00.0 represents a range of 0.1-99.9 seconds, 0.00 represents a range of 0.01-9.99 seconds, 000. The range is 1-999 minutes, please note that this is a minute.