Yamaha HS5 Powered Studio Monitor Pair with HS8S Subwoofer Bundle — 5-Inch Bi-Amplified Nearfield Speakers, 8-Inch Sub, 2.1 Monitoring System for Mixing, Mastering, Music Production and Home Recording

Yamaha HS5 Powered Studio Monitor Pair with HS8S Subwoofer Bundle — 5-Inch Bi-Amplified Nearfield Speakers, 8-Inch Sub, 2.1 Monitoring System for Mixing, Mastering, Music Production and Home Recording

• COMPLETE 2.1 STUDIO MONITORING SYSTEM: The Yamaha HS5 bundle includes 2 HS5 bi-amplified nearfield studio monitors and 1 HS8S 8-inch powered studio subwoofer for a full-range 2.1 reference monitoring setup that covers 22Hz to 30kHz; everything a mixing or mastering engineer needs for accurate frequency reproduction from the deepest bass to the highest harmonics
• YAMAHA HS5 BI-AMPLIFIED NEARFIELD MONITORS: Each HS5 features a 5-inch cone woofer and 1-inch dome tweeter driven by a dedicated 70W bi-amp system with 45W powering the low frequencies and 25W powering the highs; the 2-way bass-reflex design delivers a frequency response of 54Hz to 30kHz with the flat, uncolored accuracy that has made the Yamaha HS Series an industry standard for reference monitoring
• YAMAHA HS8S POWERED SUBWOOFER EXTENDS BASS TO 22HZ: The 8-inch cone woofer with 150W class-D amplifier reaches down to 22Hz for accurate low-frequency monitoring that the HS5 monitors cannot reproduce on their own; adjustable HIGH CUT and LOW CUT crossover controls from 80Hz to 120Hz with a PHASE switch let you integrate the subwoofer seamlessly with the monitors for balanced bass response in any room
• IDEAL FOR MIXING, MASTERING AND MUSIC PRODUCTION: Whether you are mixing tracks in a home recording setup, mastering for distribution, producing electronic music, scoring film and game audio or setting up a project studio for vocal tracking, this 2.1 powered monitor system delivers the flat frequency response and transient detail needed for critical listening and confident decision-making at the mix position
• ROOM CONTROL AND HIGH TRIM RESPONSE CONTROLS: Each HS5 includes dedicated ROOM CONTROL and HIGH TRIM switches that let you adjust the low-frequency and high-frequency response to compensate for room acoustics and speaker placement near walls or corners; these controls ensure accurate reproduction regardless of whether your monitors are on a desk, stands or mounted on a shelf
• LOW RESONANCE MDF ENCLOSURE WITH NOISE-REDUCED PORT: The HS8S cabinet is built from dense MDF using a traditional three-way mitered-joint technique that anchors the corners for increased durability and reduced resonance; the specially designed bass-reflex port minimizes turbulence and vortex effects by up to 6dB for clean low-frequency reproduction without port chuffing at high output levels
• XLR AND TRS INPUTS WITH STEREO EXTENSION OUTPUTS: Both the HS5 monitors and the HS8S subwoofer accept balanced XLR and 1/4-inch TRS connections from any audio interface, mixer or monitor controller; the HS8S also includes stereo XLR extension sub outputs so you can daisy-chain an additional subwoofer or route the high-passed signal to the monitors for flexible 2.1 system configuration