Yakamoz Pack of 15 Blade for Cutting Plotter Vinyl Cutter Graphtec CB09 Cameo Craft ROBO Pro with Springs, 30/45/60 Degree
Product Description
Yakamoz Pack of 15 Blade for Cutting Plotter Vinyl Cutter Graphtec CB09 Cameo Craft ROBO Pro with Springs, 30/45/60 Degree
- Use with Yakamoz CB09 blade holder. Yellow: 30 degree; Red: 45 degree; Blue:60 degree
- 30° blades are predominantly used for cuting very thin window tint and mylar materials
- 45° blades are the standard blade that comes with most vinyl cutters. They are recommended for all standard cast and calandered vinyls as well as other thin materials such as ThermoFlex Plus
- 60° blades are recommended for thicker materials such as reflective films, flock and twill materials and also sand-blast resist
- Made from tungsten cemented carbide. High hardness (HRA92.6), come with springs
Yakamoz 15pcs CB09 Graphtec Blade Vinyl Cutter Plotter Cutting Blades 30/ 45/ 60 Degree
Specification:
Material: Stainless Steel
Length of Blade: 19mm
Blade Diameter: 0.9mm
Color: 30°yellow cap, 45°red cap, 60°blue cap.
30°Blades for Cutting large fonts and thick materials which is about 1mm.
45°Blades for Cutting general fonts and vinyl film which within 1mm.
60°Blades for Cutting very small font & intricate line-art logos which within 0.5mm.
Features:
Tool consistency.
Materials with ultra - hardness, carbide, super - toughness, longer wear and edge grinding with ultrafine polishing, edge more.
Suitable for polishing wood, pvc mahogany color, precision, MDF and other relief.
Usage:
1. Blade should not extend too long,generally within half a millimeter is better, while paying attention to extended balde longer properly when carve the
small print, in order to avoid the blade holder take the carved strokes away. Suitably engraved small print with new cutter and slow down.
2. When the word carved with angular phenomenon,you should change the blade to eliminate the problem,if the phenomenon persists after change blade,
it should be the holder problem.
3. When problem arise the blade holder,try a drop of oil in the bearing and rotate the blade several times to lubricate, if still unresolved, consider replacing the
blade holder.
Package Included:
5x Blades of 30 Degree
5x Blades of 30 Degree
5x Blades of 30 Degree
Note: The Graphtec Blade Holder is NOT included!!
Technical Specifications
You might also like
HQMaster 45 Degree Vinyl Cutter Blades Lettering Blade for Graphtec Cutting Plotter, Red Cap Pack Of 10 with Springs
NT Cutter 9mm Snap-Off Precision Blades, 30 Degree Blades, 100-Blade/Pack, 1 Pack (BD-1800)
LGDehome CB09 Graphtec Blade Holder Base with 15pcs Precision Cutting Blades Cutting Plotter Vinyl Cutter Silhouette Cameo(1xBlade Holder+15pcs 30/45/60 Degree Blades with 15x Spring+15xBlade Cover)
Yakamoz High Quanlity CB09 CB09U Graphtec Blade Holder Base for Graphtec Cutting Plotter Vinyl Cutter Cameo
CB09 Graphtec Blade High Quanlity Holder Cutting Plotter Holder.