YELUFT 3.7V 2000mAh Lithium Polymer Rechargeable Battery for ESP32 4pcs

YELUFT 3.7V 2000mAh Lithium Polymer Rechargeable Battery for ESP32 4pcs

• Safety and Reliability: Our product utilizes a cutting-edge, A-grade lithium battery system. Compared to others, it offers superior capacity and density, along with more stable discharge performance and an extended lifespan. Additionally, it meets the stringent UN 38.3 safety standards, ensuring both safety and reliability
• Protection Mechanisms: When the charging voltage reaches the highest battery voltage (4.2V), the protection board will automatically power off, it will not continue to charge; when the voltage drops below 3.0V, the protection board will also turned off to prevent deep discharge of the battery. Overcharge and overdischarge can lead to the loss of cell performance and battery function
• Prohibit Reverse Charging: Connect the positive and negative poles of the battery correctly and strictly prohibit reverse charging. If the positive and negative terminals of the battery are reversed, the battery cell cannot be charged. At the same time, reverse charging will reduce the charging and discharging performance and safety of the battery cell, and may cause heating and leakage
• Storage: When not in use for a long time, please keep the battery voltage between 3.7V-3.9V and the storage temperature must be within the range of -20°C~45°C. The capacity for a long time storage shall be 40%~80%. We recommend charging the battery every 3 months after receiving it and storing it in a cool and dry place
• Widely Application: With JST 1.25 plug, these 2000mAh LiPo battery can be used for ESP32 development board whose plug is SH1.25-2, Mesh Node T114 and other low-power IoT/DIY electronics requiring compact power solutions