YARONGTECH 8 x NFC sticker RFID anti-metal on metal tag label 13.56mhz Dia 25mm
Product Description
YARONGTECH 8 x NFC sticker RFID anti-metal on metal tag label 13.56mhz Dia 25mm
- M1 Chip operates at 13.56MHz wireless frequency,according to the ISO14443A standard,and contains 1K bytes of read/write memory,but UID can’t change,uid is not rewritable
- These RFID cards work with KABA,SAFLOK,MIWA AND ONITY LOCKS. But they can NOT work with HID,Salto and Assa Abloy Locks/System,Amiibo and Tagmo,etc.
- All cards are pre-programmed with a unique ID(4 Byte UID). The UID is NOT changeable, factory default key: FF FF FF FF FF FF
1.MIFARE Classic 1k chip
2.anti-metal
3.25mm diameter.
4.with adhesive back.
5.can work with RC522 and PN532
MIFARE and MIFARE Classic are trademarks of NXP B.V.
Technical Specifications
You might also like
YARONGTECH-50pcs MIFARE Classic 1K Dia 25mm adhesive RFID Sticker NFC tag
HiLetgo RFID Kit - Mifare RC522 RF IC Card Sensor Module + S50 Blank Card + Key Ring for Arduino Raspberry Pi
THONSEN 13.56MHz MIFARE Classic 1K Sticker On-Metal 25mm(1 Inch) Round RFID Anti-Metal Label Tag ISO14443A (White, Pack of 10)
YARONGTECH-13.56MHZ ISO 14443A Blank White Printable MIFARE Classic 1K chip Plastic NFC Card,ic Card,RFID Card Pack of 10
SunFounder Mifare RC522 Card Read Antenna RF Module RFID Reader IC Card Proximity Module for Arduino
125 khz RFID Sticker,PVC Material 1mm Thick id Coin Key fobs (Pack of 10)
Gowoops RFID Kit - RF IC Card Sensor Module and S50 Blank Card and Key Ring for Arduino Raspberry Pi
THONSEN 25PCS 13.56MHz Blank NFC Stickers(Round 25mm) - NTAG213 Chip, Works with All Android NFC Smartphones and Devices
AGPtek 60kg 130LBs Holding Force Electric Magnetic Lock for Door Access Control System Electromagnet Fail-Safe NC Mode
YARONGTECH rfid MIFARE Card Reader 13.56mhz USB