Xiwai SFF-8482 SAS 29Pin to 5Gbps USB 3.0 Hard Disk Drive Raid Adapter Card with Chipset and Power Port (Need 12V/3A Power Supply)

Xiwai SFF-8482 SAS 29Pin to 5Gbps USB 3.0 Hard Disk Drive Raid Adapter Card with Chipset and Power Port (Need 12V/3A Power Supply)

• The card need 12V/3A DC5.5*2.1mm plug Power Supply, The power supply not include in the package, You need to buy it separately if you have not it
• This adapter has built-in chip, Can convert SAS disk to the USB interface of the common motherboard, so USB computers can also use the SAS disk and no need any SAS raid card
• if your USB interface without SAS function, Connect our adapter, it can directly read/write SAS hard disk, support win7, win10, win11, lunix operating system
• After conversion, the SMART of the SAS hard disk will display incomplete or no information, but it will not affect normal reading and writing
• Only SFF-8482 SAS hard disks are supported, and SFF-8639 U.2 hard disks are not supported.Supports transmission rates of SAS/SATA 6.0Gbps, 3.0Gbps, 1.5Gbps.Offers a throughput of up to 5Gbps when used with a USB 3.0 host and device,an 10x the capability of USB 2.0.