XUGERIP JST GH 1.25MM to Dupont 2.54MM Connectors Kit with Pre-Crimped Cables, Male Housing Connectors Kit for Pixhawk Flight Controller

XUGERIP JST GH 1.25MM to Dupont 2.54MM Connectors Kit with Pre-Crimped Cables, Male Housing Connectors Kit for Pixhawk Flight Controller

• Multiple Pins: The kit contains connectors with various pin configurations, 140 PCS GH1.25 MM 2/3/4/5/6/7/8/9/10 Pin Male housing;130 PCS Dupont 2.54 MM 1/2/3/4/6 Pin Male housing, which can meet the different needs of design DIY.
• Easy to use: Connect them using male/female plugs so that you can easily disconnect and remove an individual module for servicing if necessary, and then easily reinstall it without having to cut and re-solder a bunch of wires each time.
• Premium Pre-Crimped Cables: This kit has pre-made fixed-length 150mm 180pcs 28AWG wires that have 2.54 mm connectors on one end and 1.25 mm connectors on the other. These connector pins come pre-crimped to the wires so that you don't have to crimp them or solder them yourself, only to plug them.
• Pitch Size: Inluclding 1.25 MM and 2.54 MM two different distances between the centers of adjacent pins, Suitable for Pixhawk4, Pixhawk6C, 6X, Pixhawk2 the cube, Pixhack, Pixracer, PXFmini, CUAV v5, EDGE, and Inspire, Phantom and Raspberry Pi, etc. flight controller
• Includes: Total 140 PCS GH 1.25 MM and 130 PCS Dupont 2.54 MM connectors, 180pcs 6 color 28AWG cables, Heat Shrink Tubing, 1 pcs Tweezer.