Wizards Shine Master Polish & Breathable Sealant - 16 oz
Product Description
Wizards Shine Master Polish & Breathable Sealant - 16 oz
- POLY ACRYLIC FORMULA, BODY SHOP TRUSTED - Shine Master is built around a special poly acrylic polymer blend that bonds directly to new and aged paint alike, lifting oxidation and micro-marring while it lays down a deep, glass-like gloss. Body shops specify it as the car polish finishing step after every buffing sequence.
- SWIRL MARKS ADDRESSED WITHOUT ABRASIVE BITE - Work Shine Master into light swirl marks and surface scratches using firm, overlapping circular passes, and the auto scratch remover formula levels the clear coat without harsh abrasive bite. The result is a panel with uniform, reflection-sharp clarity that holds across the full surface.
- FRESH PAINT SAFE, NO SILICONE, NO WAX - Shine Master contains no free silicone or wax, making it safe to apply directly over fresh paint after the manufacturer's dry time. Use it as a liquid glass wax for cars or as a straight wax replacement, and the poly acrylic film delivers durable protection that won't wash off like a hand glaze.
- BY HAND OR BY MACHINE, FINISHING STEP READY - Run Shine Master by machine or by hand using any DA or rotary polishing compound setup, and it performs as the finishing step across every buffing system. A smooth, non-marring formula goes on clean and comes off clean, leaving a streak-free, smear-free surface ready for the show floor.
- EVERY EXTERIOR SURFACE, ONE PRODUCT - Safe across paint, clear coat, fiberglass, Lexan, plexiglass, and marine gelcoat, Shine Master handles the entire exterior without product swapping. Professional detailers running full paint correction sequences close with it as the vehicle sealant step on cars, trucks, and motorcycles.
Whether you’re a proud owner of a new car, show car, motorcycle, boat, airplane, RV or just a nice vehicle, you will appreciate the quick and easy application of our best-selling and highly regarded Shine Master Polish & Breathable Sealant. This car polish / paint sealant is simple to use as a cleaner, polish and breathable sealant that assures users of a show-quality gloss and long term durability. Developed to remove swirl marks, fine line scratches and light oxidation for that showroom shine without using heavy abrasives. Easy to use by hand or with a polisher machine on new or aged paint surfaces; factory, custom, foreign and domestic. Shine Master dries quickly, buffs off easily and leaves no greasy film or powder residue. This polish sealant is not water soluble so it won't wash away like most glazes. Used, recommended and sold by body shops for decades because of its versatile ease of use, ability to polish out swirls and micro polish custom paints, while leaving behind an incredible gloss and polymer protective coat that adds car paint protection. If your paint doesn’t’ need polishing but you just want to add gloss and protection, simply use a foam applicator pad dampened with water and you can actually build layers of shine that give you a crystal clear reflection. For the best layering affect you should wait 24 to 48 hours for the cross linking to cure, that way you can add a gloss layer easier without removing the previous coat. All Wizards Products are compliant with current VOC and prop 65 regulations and Shine Master contains no traditional wax (that could cloud or yellow the paint), damaging chemicals or harsh abrasives. Labels display GHS warnings and pictograms as required for professional use.









