36v 500w Motor Speed Controller for Brushed Motor
Product Description
36v 500w Motor Speed Controller for Brushed Motor
- 36V 500W Controller - This 36V motor speed controller is suitable for electrical scooter E-Bike Bicycle Tricycle; This is a brush motor controller (not fit brushless motor )
- 36V Brush Motor Controller Parameters - Work Voltage: 36Volts; Matching Motor: DC brushed motor; Rated Motor Power: 500 Watts; Under Voltage Protection: 31.5V±0.5V; Speed governor 1-4 V(Throttle); Usable Motor: 36V 500 Watts
- Sturdy and durable - Rubbergrommets protectsensative electronics from the elements; Ruggedaluminum housing withintegrated cooling fins.
- Easy to install - Various types of quick connectors for 36v 500w motor controller make installation easy and fast; Brushed motor controller providing steady and sensitive control of speed
- NOTE - Please read the instructions and plug instructions carefully. We have attached an explanation video for you to understand our 36V 500W Controller. Please note do not take the wrong power cord, or will burn. If you have any questions about 36V 500W Controller adaptation, installation, quality, etc., please contact us in time
- To operate the controller, at least four connectors must be connected first. First, connect the two thicker wires on the controller (blue and yellow) to the motor, with the blue wire connecting to the motor's red wire and the white wire connecting to the motor's black wire. Next, connect the two thicker wires on the controller (red and black) to the battery, with the red wire to the positive terminal and the black wire to the negative terminal. Third, connect the throttle connector (the throttle has three wires; ensure red wire to red and black wire to black). Finally, connect the ignition switch, turn it on, and the motor will start running
Work Voltage: 36Volts
Matching Motor: DC brushed motor
Rated Motor Power: 500 watts
Under Voltage Protection: 31.5V±0.5V
Usable Motor: 36V 500 Watts
Speed governor 1-4 V(Throttle )
Function:
This controller is uitable for electric bike tricycle & scooter
This is a brush motor controller.
Wires Interface Description:
Yellow & black(1) : brake,Thin yellow (Brake signal)/thin black(Negative Power)
Red, Black & Blue(2): Speed governor(Throttle ) Thin blue(Speed handlebar Signal input) /Thin black (Negtive Power) /thin red(1-4V Positive Power)
Red & Black(3) (small cable): Charging port.Thin red (charge input power Positive) /thin black (Power negative)
Red & Black(4)(small cable) : indicator light.Thin red (Indicator power output) /thin black (indicator negative)
Red & Blue(5) : Key Switch(power locks).Thin Red(VCC)/Thin Blue. (If there is no power locks,red connection to blue)
Red & Black(6): Brake light,Thin red (power Positive) /thin black (Power negative)
Yellow & Blue(7) : Motor connections, Thick Yellow (Motor Negative) /Thick Blue (Motor Positive)
Red & Black(8) (large cable) : Battery connections, Thick Black (Power Negative) /Thick Red (Power Positive)









