Wheel Lug Bolts M14x1.25 5 Pcs for BMW F30 F10 X1 X3 Mini, 36136781151

Wheel Lug Bolts M14x1.25 5 Pcs for BMW F30 F10 X1 X3 Mini, 36136781151

• Tired of hunting for the locking-wheel-bolt key every time you swap winter and summer tires? Replace your lost, stripped, or factory locking wheel bolts with these standard non-locking M14x1.25 lug bolts — so a standard 17 mm or 19 mm socket is all you need for seasonal tire changes, roadside repairs, or wheel-spacer installs.
• OEM Number: 36136781150, 36136781151, 36131095390, 36131122158, 36131126014, 36130141576, 36130141574, 36136890324, 36136774896. Also replaces aftermarket cross-reference numbers: 610-574, HWB0010, HWB0009. These are compatible replacement parts, not OEM-branded.
• Compatible With: BMW 2-Series F20 F21 F22 F23 (2014-2018), 3-Series F30 F31 F35 F34 GT (2011-2018), 4-Series F32 F33 F36 (2014-2018), 5-Series F10 F11 F07 GT (2011-2018), 6-Series F12 F13 F06 Gran Coupe (2012-2018), 7-Series F01 F02 (2008-2018), X1 F48 (2016-2018), X3 F25 (2011-2018), X4 F26 (2015-2018), X5 E70 (2006-2018), X6 E71 (2008-2018), i3 I01 (2014-2015), i8 I12 (2014-2016), Mini Cooper R56 Clubman R55 (2007-2018), Mini Countryman R60 (2011-2018), Mini Paceman R61 (2013-2016).
• Precision-machined to M14x1.25 thread pitch, 48.5 mm overall length, and 25 mm engaged thread length with a conical seat — dimensions matched to original BMW wheel-bolt spec so you avoid the common headache of a bolt that bottoms out, sits proud, or seats wrong. Installation tip: always hand-thread each bolt counterclockwise first until the thread clicks into place, then turn clockwise by hand before finishing with a torque wrench set to your vehicle factory spec. Do not use an impact wrench for the initial seating pass.
• Finished with a Dacromet surface coating for added corrosion resistance over bare or basic black-oxide steel bolts. The protective layer helps reduce surface rust buildup caused by winter road salt, rain, wheel-well splash, and long-term damp garage storage — so threads stay cleaner longer and breakaway torque stays more consistent between tire-change seasons.
• Each wheel lug bolt features rolled, cleanly-cut threads that follow the M14x1.25 pitch consistently from start to shoulder. This reduces the risk of cross-threading on the first install — a top complaint among cheaper stamped-thread alternatives — and gives you a clean, consistent feel the moment you hand-turn the bolt into the hub. Match the seat style (conical) to your wheel, take it slow on the first pass, and stop if you feel resistance.
• Package Includes 5 Pcs of black Dacromet-coated wheel lug bolt studs. The 5-piece count covers one full wheel plus one spare bolt kept in your glove-box, trunk, or roadside kit for the trail-side flat, the stripped bolt mid-project, or a full conversion of your car locking lug bolts to standard non-locking ones before the next tire swap.