Waveshare Ethernet to UART Converter for Raspberry Pi Pico 10/100M Ethernet Enabling Network Communication Through UART Supports 2-CH Ethernet to UART Data Transparent Transmission

Waveshare Ethernet to UART Converter for Raspberry Pi Pico 10/100M Ethernet Enabling Network Communication Through UART Supports 2-CH Ethernet to UART Data Transparent Transmission

• Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series. Onboard Ethernet to UART transparent transceiver, 2-CH UART, standalone transparent transmission for each channel
• Onboard jumpers for pin configurations. Embedded Ethernet MAC and PHY layers. Bi-direction transparent data transmission between UART and Ethernet
• 10/100M, full-duplex/half-duplex auto-negotiation Ethernet interface, 802.3-compliant. Auto-MDI/MDIX, detect and switch cable type automatically. Supports DHCP auto-obtained IP and DNS domain access
• Network parameter configuration like chip operating mode, port, IP, via host computer software or UART command. Four operating modes: TCP CLIENT, TCP SERVER, UDP CLIENT, UDP SERVER. KEEPALIVE mechanism support
• Full-duplex or half-duplex UART communication, supports RS485 RX/TX auto switch (external RS485 controller required). Supports virtual serial port software (provided). Comes with development resources and manual (examples for Pico/Raspberry Pi/Arduino/STM32)