Waveshare Compute Module 4 to Raspberry Pi 3 Model B/B+ Adapter, Alternative Solution for Raspberry Pi 3 Model B/B+, Support Access to CM4 Lite/eMMC Series Boards

Waveshare Compute Module 4 to Raspberry Pi 3 Model B/B+ Adapter, Alternative Solution for Raspberry Pi 3 Model B/B+, Support Access to CM4 Lite/eMMC Series Boards

• 【Install CM4 Easily】Raspberry Pi CM4 to 3B Adapter is an alternative solution for Raspberry Pi 3 Model B/B+, onboard standard CM4 connector, support access to CM4 Lite / eMMc series boards with Quad Core Cortex A72 64-bit processor, more powerful performance
• 【Interface Introduction】Onboard 4-ch USB ports, RJ45 Gigabit Ethernet Port, PoE header, HDMI Port, DSI port, CSI port, 3.5mm Headphone Jack(extended from USB) etc.
• 【Compatible with Pi 3B Series HATs】Easy access to Raspberry Pi 3B series HATs or other development projects
• 【Note1】Micro USB port is for power supply and for programming images USB SLAVE. Please do not connect to other devices when programming the image by micro USB so as to ensure that CM4 can be powered on normally
• 【Note2】When using CM4, you need to provide 5V/4A to CM4. Otherwise, it may power off, lower frequency, etc. USB 2.0 is close by default, if used dtoverlay=dwc2,dr_mode=host should be added in config.txt. It only supports 5V fan,12V is not supported