Waveshare Compute Module 3+/8GB Raspberry Pi 3 Model B+ BCM2837 Processor and 1GB RAM in a Flexible Form Factor with 8GB eMMC Flash CM3+/8GB

Waveshare Compute Module 3+/8GB Raspberry Pi 3 Model B+ BCM2837 Processor and 1GB RAM in a Flexible Form Factor with 8GB eMMC Flash CM3+/8GB

• The CM3+/8GB Compute Module contains the guts of a Raspberry Pi 3 Model B+ (the BCM2837 processor and 1GB RAM) as well as an 8GB eMMC Flash device (which is the equivalent of the SD card in the Pi).
• This is all integrated onto a small (67.6mm × 31mm) board that fits into a standard DDR2 SODIMM connector. The Flash memory is connected directly to the processor on the board, but the remaining processor interfaces are available to the user via the connector pins.
• You get the full flexibility of the BCM2837 SoC (which means that many more GPIOs and interfaces are available than with a standard Raspberry Pi), and designing the Module into a custom system should be relatively straightforward because the Pi Foundation has put all the tricky bits onto the Module itself.
• Broadcom BCM2837B0:Cortex-A53 (ARMv8) 64-bit SoC @ 1.2GHz 200PIN SODIMM connector (35U hard gold plating I/O pins)
• Compared to CM1, the CM3+ supports more OS, like Windows 10 (the free IOT-specific version from Microsoft)