Waveshare 7.5inch E-Ink Raw Display Compatible with Raspberry Pi 5/4B/3B/Zero/Zero W/Zero 2W/Pico/Pico W/Pico WH 800×480 Resolution with SPI Interface Without PCB

640x384, 7.5inch E-Ink raw display, SPI interface, without PCB

Overview

This is an E-Ink raw display, 7.5inch, 640x384 resolution, with embedded controller, communicating via SPI interface.

Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight,
it is an ideal choice for applications such as shelf label, industrial instrument, and so on.

Features

No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
Comes with development resources and manual (driver board schematic, examples for Raspberry Pi/Arduino/STM32)

Specifications

Operating voltage: 3.3V
Interface: 3-wire SPI, 4-wire SPI
Outline dimension: 170.2mm × 111.2mm × 1.18mm
Display size: 163.2mm × 97.92mm
Dot pitch: 0.255 × 0.255
Resolution: 640 × 384
Display color: black, white
Grey level: 2
Full refresh time: 6s
Refresh power: 38mW(typ.)
Standby power: 170°

Development Resources

Wiki : www.waveshare.com/wiki/7.5inch_e-Paper_HAT?Amazon

PACKAGE CONTENT

Note: This is a raw display, for easy testing and comparing, please consider the one with driver board: 7.5inch e-Paper HAT
7.5inch e-Paper x1