Waveshare 2.7inch E-Ink Display HAT Compatible with Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W/WH/Zero 2W Series Boards 264x176 Resolution SPI Interface
Product Description
Waveshare 2.7inch E-Ink Display HAT Compatible with Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W/WH/Zero 2W Series Boards 264x176 Resolution SPI Interface
- Provide online user manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32), please check the manual carefully before using!
- This is an E-Ink display HAT for Raspberry Pi, 2.7inch, 264x176 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
- No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. Onboard 4x Keys
- SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs
264x176, 2.7inch E-Ink display HAT for Raspberry Pi, SPI interface
Overview
This is an E-Ink display HAT for Raspberry Pi, 2.7inch, 264x176 resolution, with embedded controller,
communicating via SPI interface.
Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight,
it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
Features
No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
Compatible with Raspberry Pi 2B/3B/Zero/Zero W
Onboard 4x Keys
SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.
Comes with development resources and manual (driver board schematic, examples for Raspberry Pi/Arduino/STM32)
Specifications
Operating voltage: 3.3V
Interface: 3-wire SPI, 4-wire SPI
Outline dimension: 85mm × 56mm
Display size: 57.288mm × 38.192mm
Dot pitch: 0.217 × 0.217
Resolution: 264 × 176
Display color: red, black, white
Grey level: 2
Full refresh time: 6s
Refresh power: 24mW(typ.)
Standby power: 170°
Development Resources
Wiki : www.waveshare.com/wiki/2.7inch_e-Paper_HAT?Amazon
PACKAGE CONTENT
2.7inch e-Paper HAT x1
RPi screws pack (2pcs) x2
