PoE Texas 4 Port PoE/PoE+ Injector with 48V 60W Power Supply - Gigabit Injector - Active Mode A Power Over Ethernet Multi Port PoE Adapter - Supports 4 PoE (802.3af or at) up to 60 watts
Product Description
PoE Texas 4 Port PoE/PoE+ Injector with 48V 60W Power Supply - Gigabit Injector - Active Mode A Power Over Ethernet Multi Port PoE Adapter - Supports 4 PoE (802.3af or at) up to 60 watts
- Simplify installations with a multi port PoE injector/adapter. Power up to 4 IP cameras, desktop phones, WiFi access points, or other low voltage devices through a network data cable using this Power over Ethernet (PoE) injector.
- Active PoE means the right power at the right time. An active PoE/PoE+ injector negotiates with the powered device to deliver the voltage needed, so there are no concerns about accidentally burning out lower powered or non-PoE devices.
- Includes a 48v 60w power supply. This 48v PoE+ injector is fully IEEE 802.3at compliant; works with Cisco products. Mode A power delivery on pins 1,2(-) 3,6(+).
- Plug and play. Wall mountable. This Gigabit injector offers 10/100/1000 Mbps data, delivering lightning fast wired speeds with no loss of signal quality via 4 Data In ports and 4 Data + Power out ports, to devices up to 328 feet away.
- All of our PoE products are backed by a 1-Year replacement warranty and a 30-Day, no questions asked, return policy. Expert help is only a phone call away. Please call 512 479 0317 for assistance.
Add gigabit PoE to any 10/100/1000 capable network switch or router
Injects power and data on to one Ethernet cable
Power up to 4 devices with 60 watts combined total power
Mix and match devices
IEEE 802.3at compliant for Class 4 PoE Devices
4 data in, 4 Data + PoE out ports
Extends power up to 328 ft (100 meters)
Active autonegotition - power is off until a compatible device is connected
48 volt, 60 watt power supply included - 110 to 220 volt AC operation - 90% efficient - UL, DoE, CE and FCC listed
Description
This device provides power and data over one Ethernet cable using pins 1,2 and 3,6. Active autonegotion protects non-PoE devices and will provide data only if plugged in. If power is needed, your powered device will receive 48v. The AT-4-48v60w can support a combined power total of 60 watts for all devices on all 4 ports with a maximum output of 30 watts per port. Check device specifications for power needs. For up to 120 available watts see the AT-4-48v120w or the AT-4-56v120 for up to 120 watts of power.
Applications:
WiFi Access points like Cisco, Meraki, Aruba 802.11ac
IP Cameras like Hikvision
PoE Texas' Gigabit "GAT" and "GAF" PoE Splitters (see below)
Any IEEE 802.3af or 802.3at Device
Compatible PoE splitters sold by PoE Texas
GAT-USBC
GAT-5v20w - Product Line
GAT-12v25w - Product Line
GAF-5v10w - Product Line
GAF-Lightning-PD - 5v Power + Data
AF-Lightning
GAF-MicroUSB
GAF-USB
GAF-12v9w
GAF-12v12w
AF-Huddlecam
Technical Specifications
You might also like
PoE Texas AT-8-56v120w | Gigabit 8 Port Active 802.3at Power Over Ethernet Injector | with 56 Volt 120 Watt Power Supply
TRENDnet Gigabit Power Over Ethernet Plus Injector, Converts Non-Poe Gigabit to Poe+ or Poe Gigabit, Network Distances Up to 100 M (328 ft.), TPE-115GI
PoE Texas GAT-USBC | Easily Convert PoE+ to USBC for Google WiFi, Nest IQ and More | Converts POE to 5v, 9v, 12v, 15v or 20 Volts with Divided Gigabit Data
Gigabit Ethernet Media Converter, Single Mode Dual SC fiber, 1000Base-LX to 10/100/1000Base-Tx, up to 20km, Pack of 2
Ubiquiti INS-3AF-I-G Indoor Gigabit Adapter
StarTech.com 6U Wall Mount Patch Panel Bracket - 14 inch Deep - 19" Patch Panel Rack for Shallow Network Equipment- 44lbs Capacity (WALLMOUNT6),black
Cable Matters Rack or Wall Mount 24-Port Cat6, Cat 6 Keystone Patch Panel (Blank Patch Panel)
Cable Matters 10-Pack Snagless Cat6 Ethernet Cable (Cat6 Cable, Cat 6 Cable) in Black 5 Feet
NavePoint Cantilever Server Shelf Vented Shelves Rack Mount 19 Inch 1U Black 10 Inches (250mm) deep