WAC Landscape Lighting, 3in Inground Light LED 120V with Adjustable Beam Angle and Integral Brightness Control 3000K in Bronze
Product Description
WAC Landscape Lighting, 3in Inground Light LED 120V with Adjustable Beam Angle and Integral Brightness Control 3000K in Bronze
- Casted using a special k-alloy aluminum that is engineered to withstand the most challenging environments over time. Solid brass coated in bronze (-BBR finish) is available for enhanced protection against corrosive elements and is recommended for use in coastal or marine environments.
- This well light has a removeable cover that is gasketed to create a water tight seal with IP66 rating for protection against high-pressure water jets and outdoor elements.
- A twist of the light engine inside of the housing at indexed intervals allows fixed beam angle adjustment from flood to spot while a mechanical dial at the base of the light engine provides smooth integral brightness control. The light engine can be tilted in two 10 degree intervals and rotated to cast light in any direction.
- Includes a 3ft lead wire with two gel filled direct burial wire nuts. A magnetic or electronic power supply is required (sold separately) for 12V fixtures. A variety of accessories are sold separately for additional mounting and glare control options.
- High Powered LED, Input: 110-120V AC, Power: 3.5-11.5W (23VA), Brightness: 65-515Lm, Beam Angle: 15, 30, 45, 60Deg, Tilt: +/- 20 Deg, CRI: 85, Rated Hours: 45,000. Smooth and continuous dimming with a Magnetic Low Voltage dimmer (MLV).
- Standards: UL & cUL 1598 and IP66 Rated for Wet Locations (See Specification Sheet for complete details).
Simplicity meets function and durability with this ground breaking patented WAC landscape lighting 3in inground well light, available in 12V LED or 120V LED and 2700K warm white or 3000K soft white color temperature options. Rated to support over 4,500Lbs of drive over protection. One fixture fits all applications, eliminating the need to choose from dozens of varying beam angles and light outputs found in traditional landscape fixtures. This well light features indexed beam adjustment at 15, 30, 45, or 60 degrees, light output modification from 12W to 2W (11.5 to 3 in 120V), and tilt adjustment up to 20 degrees in either direction. A quick and simple twist of the fixture lens at indexed intervals allows adjustment of the beam angle. Light output can also be continuously adjusted from 12W to 2W (11.5 to 3 in 120V) by the twist of a dial. Factory sealed water tight and IP67 rated for protection against high-pressure water jets and outdoor elements. Available in a Bronze finish with an aluminum construction or in a Bronze finish with a solid brass construction. Brass may provide enhanced protection against corrosive elements found in coastal and marine environments. Luminaire includes a 6Ft lead wire and direct Burial gel filled wire nuts. Power Supply is required for 12V option, additional accessories including a concrete pour kit, and rock guard are available for various mounting and installation options.
