USAQUAPRO F64A1-AirKit Manual Backwash Air Pocket Oxidation Iron Filter Control Valve for Water Treatment with Air Injection Kit, Top Strainer, BSPP/FIP-1" threads, NPT Female threads (with adapters)

USAQUAPRO F64A1-AirKit Manual Backwash Air Pocket Oxidation Iron Filter Control Valve for Water Treatment with Air Injection Kit, Top Strainer, BSPP/FIP-1" threads, NPT Female threads (with adapters)

• F64A-1"-AirKit Control Valve has a Mounting base 2.5"-8NPSM, Inlet/Outlet ports G1" Female threads (or FIP1" threads with adapters included), G1/2 male Drain port equipped with hose barb nipple 1/2, can use a "funny pipe", and G3/8 male Brine port equipped with 3/8 PE tube connector fitting. Thread Adapters FIP-1" (NPT) are suitable for North America.
• Valve Type: Manual multi-port Iron Filter or Softener control valve with ceramic disc gates. Flow Rate: up to 17.6 GPM (4m³/h) for efficient water filtration.
• This Control Valve is for use in water with "Air Pocket" technology (carbon, sediment, multimedia, sand, or any other backwash media with mineral tank size up to 1354). Can be used in softeners, for residential or commercial application.
• Mineral tank is usually a FRP tank, holding the media, and this Control Valve will do backwash, brine rinse, refill brain tank (not used when AirKit applied), and rinse service for the media. Media recommended: Filter-Ox (up to 1054 tank), Birm (up to 1252 tank), Katalox-Lite (up to 1354 tank), GAC/FAG (up to 1354 tank), etc.
• FRP Tank Size Compatibility: Up to size 1354 with media like Katalox, FAG, GAC; up to size 1665 with Ion exchange resin.
• Single tank control valve, no water pass when the valve is in Backwash or other regeneration mode.
• Gasket Material: Corrosion-resistant for long-lasting performance.