UHPPOTE 600LBS (280KG) Electric Magnetic Door Lock, Fail-Safe 12/24V DC
Product Description
UHPPOTE 600LBS (280KG) Electric Magnetic Door Lock, Fail-Safe 12/24V DC
- ✅ DURABLE & ANTI CORRSION - Adopts high-strength aluminum alloy with hard anodized finish, wear-resistant, rust-proof and long service life, ideal for high-frequency door opening and closing scenarios.
- ✅ 600LBS HOLDING FORCE – Available in 600LBS (280kg) magnetic pull. High-grade silicon steel coil and reinforced laser-welded core provide 2–3X stronger impact resistance than standard locks, ensuring reliable locking for high-traffic entries.
- ✅ FAIL SAFE DESIGN - Unlocks automatically when power cuts off, fully complying with fire safety standards for emergency evacuation.
- ✅ CLEAR LED INDICATOR - Equipped with a LED indicator, users can easily identify the status of lock at a glance, enhancing convenience and security.
- ✅ EASY INSTALLATION & WIDE COMPATIBILITY – Compatible with 12/24VDC access control systems. Fits wood, metal, glass, and fire doors; Can works with Z&L brackets of UHPPOTE for Inswinging doors.
Features:
Collinear Load Test 280kg / 600pounds
Dual Voltage 12 or 24 VDC(optional)
The Standard Voltage is 12VDC when Finished
MOV Provides Reverse Current Protection
Anti-Residual Magnetism Designed
High Strength Material,Anodized Aluminum Housing
Design without Mechanical Failure
Increase the holding Force,Dual Isolative Housing
CE Certificate by European Union,MA Certificate by China Public Security Office
Specifications:
Size: 250Lx48.5Wx25H(mm) / 9.84"x1.91"x0.98"
Armature Plate Dimension: 180Lx38Wx11H(mm) / 7.09"x1.5"x0.43"
Holding Force: 280kg / 600Lbs
Input Voltage: 12 or 24VDC
Current Draw: 12V/500mA or 24V/250mA
Suitable: Wooden door, Glass door, Metal door, Fireproof door
Surface Temp: Less than +20℃ / 68℉
Operating Temp: -10℃~+55℃(14℉-131℉)
Humidity: 0~90%(non-condensing)
Cover Finish: Anodized aluminum
Lock Finish: Zinc
Armature Plate Finish: Zinc
Weight: 2.1Kg / 4.63lb
Package:
1 x Electric Magnetic Lock
1 x Armature Plate
1 x User manual
1 x Installation Kit
Caution:
A. The screw of armature plate should not be fixed too tight. Proper elasticity should be guraranteed for the rubber ring so that the armature plate can adjust itself to the appropriate position.
B. Please keep the surface of the lock clean, or the force will be reduced because of the dust, glue or scotch tape on it.
Technical Specifications
You might also like
UHPPOTE Power Supply 110-240VAC to 12VDC for Door Access Control System & Intercom Camera
UHPPOTE Push to Exit Button Switch NO/COM Output Stainless Steel Panel for Access Control Hollow Door
UHPPOTE Power Supply Box Input AC110V Output 12VDC including Wiegand 26-bit Access Control Board, Transformer with UL-Recognized
Visionis VIS-7000 Indoor Green Square Request to Exit Button for Door Access Control with LED Light, NC, C and NO Outputs
FUGEST 600lbs Electromagnetic Lock Holding Force for Access Control Single Door 12V
UHPPOTE Professional Wiegand 26 Bit TCP IP Network Access Control Board with Software For 4 Door 4 Reader
UHPPOTE Security RFID EM-ID Card Reader 125KHz Wiegand 26/34 Output for Access Control
UHPPOTE Touch Access Control Keypad with Wiegand 26-bit Interface Support 2000 Users for 125khz RFID Card
DC 12V NC NO Square, ZOTER Touch Sensor Door Exit Release Button Switch w LED Light
UHPPOTE Proximity 125KHz RFID EM-ID Card Keyfob for Door Access Control (Read Only, Color Blue, 100 Pack)