Sky High Bull's-Eye (24"x24") Drone Ground Control Point GCP - UAV Aerial Target for Mapping & Surveying (6 Pack) | Center Eyelet (Black/White Markers) | Pix4D & DroneDeploy Compatible
Product Description
Sky High Bull's-Eye (24"x24") Drone Ground Control Point GCP - UAV Aerial Target for Mapping & Surveying (6 Pack) | Center Eyelet (Black/White Markers) | Pix4D & DroneDeploy Compatible
- 24”x24” AERIAL TARGETS - Designed for low to medium altitude drone mapping and scanning, these drone GCPs were made for drone mapping up to 400 feet. The standard 24”x24” size is useful when scaling and verifying the map, providing a standard reference distance during post-processing.
- DRONE GCP WITH CENTER EYELET - The center eyelet design allows the user to easily identify the center of the GCP with a survey rod without tearing the aerial target. The center eyelet can also be used to position the aerial target directly over existing survey nails for precision mapping with existing ground control points.
- LIGHTWEIGHT & DURABLE AERIAL TARGETS - Using a weatherproof mesh material, these aerial targets were made to be highly visible yet lightweight, a big benefit when traveling or placing the ground control points in the field. The material is made with a matte finish which reduces glare from sunlight and overexposure on sunny days, which makes selecting the center of the target easier during post-processing.
- WORKS WITH LEADING PHOTOGRAMMETRY SOFTWARE - Pix4D, DroneDeploy, Metashape, OpenDroneMap/WebODM, UAV4GEO Lightning, DJI Terra, Esri Drone2Map, Bentley ContextCapture, SimActive Correlator3D, 3Dsurvey, Propeller, Global Mapper Pro & RealityCapture
- UAV GCP WITH CORNER ANCHOR POINTS - With eyelets at each corner to easily anchor the aerial targets, the corner anchor points prevent the GCPs from moving during mapping. The anchors also allow the GCPs to be left in the field if needed for repeat flights over a period of time, providing peace of mind that the aerial targets offer repeatable location data for high-accuracy mapping and photogrammetry.
Finally a Ground Control Point (GCP) to meet any UAV Pilot's needs. Never tear your GCP again when placing your surveying rod into the center of the target. With this GCP, simply insert the tip of your surveying rod into the center eyelet for a precision measurement every time. With a durable mesh design, this GCP can be reused countless times. Never dread carrying a large GCP around with you again. These lightweight, foldable GCPs are easy to transport and carry. If the wind is a concern, simply use the 4 corner eyelets to anchor the GCP to the ground to ensure that the GCP stays in place. With an ideal 24 inch by 24 inch size, these GCPs are perfect for UAV mapping. The GCPs can also be used as a scale during the reconstruction process of the aerial mapping due to their exact size. Take your drone mapping to new heights today with the Sky High Bull's-Eye GCP 6 Pack!
Technical Specifications
You might also like
UAV Ground Control Points (GCPs)/Aerial Targets for Aerial Mapping & Surveying (6 Pack) with Center Passthrough
UAV Ground Control Points (GCPs)/Aerial Targets for Aerial Mapping & Surveying (10 Pack) with Center Eyelet Numbered 0-9 (Black & White)
DJI High Capacity Phantom 4 Series P4-Intelligent Flight Battery, White (CP.PT.000601)
Remote Pilot Test Prep 2019: Study & Prepare: Pass your test and know what is essential to safely operate an unmanned aircraft – from the most trusted source in aviation training (Test Prep Series)
Drones Landing Pad，Homga Universal Waterproof D 75cm/30'' Portable Foldable Landing Pads for RC Drones Helicopter, PVB Drones, DJI Mavic Pro Phantom 2/3/4/ Pro, Antel Robotic, 3DR Solo (Landing pad)
Hoodman Drone Launch Pad (3 ft. Diameter)
Reach RS+ RTK GNSS Receiver with an App as a Controller
AdirPro Prism Pole Bipod (Red)
Hoodman Drone Launch Pad (5 ft. Diameter)
Case Club Waterproof DJI Phantom 4 Drone Wheeled Case with Silica Gel (Propellers On)