Tub and Tile Paint Refinishing Kit, 17 Oz White Bathtub Paint

Tub and Tile Paint Refinishing Kit, 17 Oz White Bathtub Paint

• Complete Tub and Tile Refinishing Kit with Hardener and 8 Tools – Everything arrives in one box: 17 oz white paint, hardener, brush, roller, sandpaper, masking tape, masking film and gloves. No separate shopping trip for supplies, so your bathtub refinishing project stays organized from prep through the final coat.
• Built for Strong Adhesion on Properly Prepared Surfaces – This bathtub paint bonds to clean, dry, sanded porcelain, ceramic, fiberglass and metal, including tubs, sinks and tile. Surface prep is the key step: scuff, degrease and let it dry fully before painting. Thin, even coats help the finish resist everyday scratches and wear in high-moisture bathrooms.
• Works on Tubs, Sinks, Shower Walls and Tile – Use this tub paint and tile paint for bathroom refinishing across fiberglass tubs, porcelain sinks, ceramic tile and shower surrounds. For light surfaces, 2–3 thin coats are usually enough; darker or stained surfaces may need an extra coat. Each coat should dry before the next one goes on.
• Water-Based, Low-Odor Semi-Gloss Finish – This water-based tub and tile paint dries to a clean white semi-gloss finish for indoor bathroom refinishing. Ventilate the room while painting. Once fully dried and set, wipe with mild soap and water; avoid bleach and abrasive cleaners to help protect the finish. Not for use over existing paint or peeling coatings — strip those first.
• 17 Oz Covers Approx. 25–30 Sq Ft – Coverage depends on surface condition, color and how thick you apply it. A standard tub may need more than one 17 oz kit, so measure your project area first. Allow about 24 hours between coats and roughly 7 days for full drying and setting before normal bathroom use.