Tractor Stafast Hitch - Wagon Std Stafast

The Stafast Hitch From Foresight Services Llc Allows A Farmer With Leg, Back Or Mobility Impairments To Hitch And Unhitch Wagons Without Leaving The Tractor Seat Or Lifting A Heavy Drawbar.The Stafast Hitch Has Two Parts: A Receiver Bolted On The Tractor Drawbar And A Wagon Tongue Spring Kit. The Receiver Unit Is A Funnel Shaped Device Bolted Onto The Tractor Drawbar. The Wagon Kit Is A Heavy-Duty Tension Spring That Holds The Tongue Up Off The Ground (Sold Separately). As The Tractor Is Backed Up, The Receiver Automatically Lines Up The Tongue And Guides It Under A Spring-Loaded Hitch Pin. The Hitch Pin Automatically Springs Into The Tongue When It Is Aligned With The Drawbar. A Rope Is Pulled To Unhitch The Wagon And Reset The Hitch Pin. The Sides Of The Funnel Are Spring Loaded And Flex Open When The Tractor Is Turning Sharply. The Stafast Hitch Has Two Parts: A Receiver Bolted On The Tractor Drawbar And A Wagon Tongue Spring Kit. The Receiver Unit Is A Funnel Shaped Device Bolted Onto The Tractor Drawbar. The Wagon Kit Is A Heavy-Duty Tension Spring That Holds The Tongue Up Off The Ground. As The Tractor Is Backed Up, The Receiver Automatically Lines Up The Tongue And Guides It Under A Spring-Loaded Hitch Pin. The Hitch Pin Automatically Springs Into The Tongue When It Is Aligned With The Drawbar. A Rope Is Pulled To Unhitch The Wagon And Reset The Hitch Pin. The Sides Of The Funnel Are Spring Loaded And Flex Open When The Tractor Is Turning Sharply. Standard Hitches Have 7/8" Hitch Pin, Heavy Duty Hitches Have 1 1/4" Hitch Pin. The Wagon Tongue Spring Kit Includes A Heavy-Duty Top Plate For The Wagon. The Original Top Clevis Must Be Removed From The Wagon, Then Replaced With The Heavy Duty Top Plate. The Hitch Pin On The Hitch Only Goes Through The Top Plate Of The Wagon Clevis, So It Must Be Reinforced Before Using With The Stafast Quick Hitch.