Throttle Control Mechanism for Gas Engine Air Compressors, Cable Whip Style (13HP and Above Engines, 36" Throttle Control Cable)

Throttle Control Mechanism for Gas Engine Air Compressors, Cable Whip Style (13HP and Above Engines, 36" Throttle Control Cable)

• Cable style Throttle Control, 36" Overall length for 13HP Engines and Larger.
• Stroke Length: 1.00 inch. Retracted Spring Force: 28.80 LBF.
• Throttle Control: For Throttle Control Cable Variation option, please select your Throttle Control Cable HP and OAL (Overall length) from the Variation options above.
• Throttle Control Cable: 1/8" Male NPT Inlet Connection. The throttle control connects from the unloader to your engine throttle arm and acts as a relay notifying the engine of when its time to run or idle. Each throttle control connects from the throttle outlet on the valve with a Z Bend connection type on the tip of the cable.
• These Throttle controls are used in conjunction with a pilot valve and an unloader valve. When the compressor reaches the unload (cut-out) pressure the pilot valve sends a pneumatic signal to the throttle control which actuates and extends to reduce the engine speed. As the compressed air is used and the compressor reaches the load (cut-in) pressure the pneumatic signal is discharged by the pilot and the throttle control retracts to return the engine to normal operation speed.