Thermalright Phantom Spirit 120 SE Black CPU Air Cooler,Doubler CPU Fans and Double Towers,154mm High CPU Cooler,for AMD:AM4/AM5,Intel 1150/1151/1200/1851/1700(PS120 SE Black)

Thermalright Phantom Spirit 120 SE Black CPU Air Cooler,Doubler CPU Fans and Double Towers,154mm High CPU Cooler,for AMD:AM4/AM5,Intel 1150/1151/1200/1851/1700(PS120 SE Black)

• [Better cooling] Adopting black paint fully electroplated reflow soldering process, the top adopts blackened nano coating+fully electroplated heat pipe+fine micro carved copper bottom, greatly increasing the effective heat dissipation area. memory cut corner avoidance design and can achieve excellent heat dissipation performance during operation.
• [Product specification] PS120SE Black; CPU Cooler dimensions:125(L)x135(W)x154(H)mm (4.92x5.31x 6.06 inch); Heat sink material: aluminum,The main body is made of anodized black frosted top pieces + finely carved pure copper base technology, the main body is fully aluminum fins, bringing maximum heat dissipation area. combined with the high thermal conductivity of the thermal paste, which can perfectly perform the cooler's most powerful cooling effect.
• 【PWM Fan】 TL-C12B V2; Standard size industrial grade PWM performance PC fan: 120x120x25mm ; Fan speed (RPM): 1500rpm±10%; Power port: 4-pin; Voltage: 12V; Air flow: 66.17CFM (max); Noise level ≤25.6dB(A), high performance fan combined with efficient heat dissipation The cooling body of the unit gives you the best cooling effect.
• [Compatibility] CPU cooling slot support: Intel: LGA1851/1700/1150/1151/1155/1156/1200, AMD: AM4/AM5; for different CPU slot platforms, provide the corresponding mounting plate or fasteners, can be combined with the installation instructions or follow the tutorial to get on the machine.(Note: AMD's motherboard installation requires the use of the original motherboard backplane for installation.)
• [Detailed description] Soft silicone corner pads are installed around the CPU fan to reduce noise.The radiator is equipped with a Y-type adapter cable (one end of 3-pin, one end of 4-pin), which can be very good to connect the two fans in series, to avoid the motherboard interface is not enough.