TURKU TU90WD-OD - Residential 9KW Wet & Dry 240V Sauna Stove External CON5 Digital Controller
Product Description
TURKU TU90WD-OD - Residential 9KW Wet & Dry 240V Sauna Stove External CON5 Digital Controller
- Residential Use Only: Designed specifically for residential personal use in traditional saunas
- Sauna Room Specifications: Recommended sauna room volume ranges from 250 to 450 cubic feet, suitable for both wet and dry sauna applications
- Advanced Digital Control Features: External digital controller with 60-minute operating time, 11-hour heating delay capability, temperature range of 104-194F, high-grade coil construction, and high-temperature cut-off protection for safety
- Electrical Specifications: 9KW power output, 240V voltage, 37.5 Amp current draw, single phase operation, requires 8 AWG wire and 40 Amp circuit breaker
- Product Dimensions: Stove body measures 22.5 x 16 x 10.5 inches with firmer construction, external controller dimensions are 10 x 9 x 3 inches
TU90WD-OD - 9KW RESIDENTIAL FIRMER BODY STRUCTURE WET/ DRY TURKU SAUNA SPA HEATER STOVE WITH OUTER DIGITAL CONTROLLER. FOR TRADITIONAL SAUNAS ONLY- IS NOT COMPATIBLE WITH INFRARED SAUNAS STRUCTURE! TURKU SAUNA HEATER FEATURES: - Firmer body structure; - Aluminum thermostat sensor casing; - Wet or Dry sauna use; - Water can be sprinkled on to the rock; - Long Life Heavy-Duty electric elements ; - Vented body design provides fast warm-up - Direct rock contact with heating elements - Included Outer Digital Controller; - Convenient and easy operation. OUTER DIGITAL CONTROLLER FEATURES.... - Outer Digital Controller will be located in a wall outside the sauna at a convenient face level; - Outer Digital Controller electronic thermostat maintains the sauna temperature extremely accurately; - Features Digital display; - Electronic timer has no ticking sound; - HIGH-TEMPERATURE CUT-OFF PROTECTION - OVERHEATING PROTECTION The temperature is controlled by the build-in thermostat sensor. However, if for any reason, the air temperature inside the heater rises to an abnormally high level, the overheating protection automatically cuts off the power supply. When the heater has cooled down the power can be on again by pressing the reset button. Before pressing the reset button, the possible cause of overheating should be investigated.





