TPMS Sensor 433MHZ Chrysler Jeep Dodge Fiat Tire Pressure Monitoring Sensor

TPMS Sensor 433MHZ Chrysler Jeep Dodge Fiat Tire Pressure Monitoring Sensor

• [FITMENT]: The CARORAV tire pressure sensor fit for 2014-2020 Chrysler 200, 2020-2024 Chrysler Grand Caravan, 2016-2023 Chrysler Grand Voyager, 2016-2024 Chrysler Pacifica, 2017-2024 Chrysler Voyager, 2012-2019 Dodge Dart, 2016-2024 Dodge Durango, 2018-2023 Dodge Durango SRT, 2021-2022 Dodge Grand Caravan, 2023 Dodge Hornet, 2016-2024 Dodge Ram 1000, 2014-2016 Jeep B-CUV, 2016-2019 Jeep C-CUV, 2022-2024 Jeep Commander, 2017-2025 Jeep Compass, 2013-2016 Jeep D-CUV, 2021 Jeep Gladiator, 2016-2022 Jeep Grand Cherokee, 2020 Alfa Romeo Castello, 2018-2019 Alfa Romeo Executive. For more precise vehicle compatibility, please refer to the details page.
• [REPLACE PART NUMBER]: 68193586AC, 68252495AA, 68313387AB, 50547691, 68336101AA, 68105280AG, 68407400AA
• [PRE-PROGRAMMED]: PRE-PROGRAMMED DO NOT mean the sensor will automatically match your vehicle, it need to require a re-learning/reset operation. And some re-learning/reset procedures may require a professional diagnostic scanner or activation tool
• [VERIFY VEHICLE FITMENT]: 1.Check “amazon confirmed fit” at the top of the page to determine the compatibility of your vehicle, 2. Check the matching information related to “APPLICABLE MODELS” on the page, 3. Please feel free to contact us if you have any questions
• [ATTENTION]: STOP INSTALLATION if it has no response. Before installation, pls use tpms tool to scan the tpms sensor. If it can't be read or triggered correctly, DO NOT proceed with the sensor replacement installation
• [HOW TO RELEARN]: OBDII RELEARN: 1.OBDII connector is required, 2.Confirm TPMS sensors are properly installed, 3.Adjust tire pressures to placard value, 4.Activate TPMS tool on left front tire sidewall next to the valve stem, 5.Repeat for Rf/RR/LR tires, 6.Apply OBD connector to DLC, 7.Tern ignition to ON, 8.Press OK on TPMS Tool to transfer date to ECU, 9.Disconnect OBD connector from DLC, 10.Turn ignition to OFF then start the engine, 11.Drive for at least 5 minutes at 28 mph