TMYPN 335x325mm PEO + PET Build Plate for Bambu Lab H2C/A2L

TMYPN 335x325mm PEO + PET Build Plate for Bambu Lab H2C/A2L

• 【Compatibility】335x325mm Diamond PEO + Carbon Fiber PET 3D printer bed is compatible with Bambu Lab A2L/H2C 3D printers.
• 【Product Features】The PEO side presents a diamond pattern, showcasing the intersection of gloss and matte surfaces to create a diamond texture, elevating the print surface with sophistication; The PET surface exhibits a pattern resembling carbon fiber. The intersection of gloss and matte surfaces forms a striped pattern, creating a three-dimensional and orderly print surface with a distinctive texture.
• 【Application】 We recommend these filaments & temperatures for the 257*257mm build plate “PLA: 65℃; PETG: 80℃”, After our extensive testing, we recommend to print PLA / TPU /PETG/ABS and use the Quiet Mode when printing the first layer to make sure the first layer is printed correctly. After 4-5 layers, you can switch to other modes.
• 【Effortless Model Removal】The high flatness and elasticity of the spring steel plate facilitate easy removal of printed models.
• 【Usage Guidelines】Pay attention to the nozzle-to-surface distance to prevent scratches that could leave permanent marks. Before each printing, please clean it thoroughly with isopropyl and wipe it with a lint-free paper towel, to make sure the surface of the steel plate is free from any impurities, especially fingerprints and grease. After each printing, Please let the plate cool down before removing it (room temperature is fine) to avoid damaging the coating.