TECPEL TG-902 Digital Paint Thickness Gauge Tester F&NF
Product Description
TECPEL TG-902 Digital Paint Thickness Gauge Tester F&NF
- Digits Display :1,999 digits
- Measurement Range :0~1,000 μm (0~40 mils)
- Applicable Metal :Magnetically sensitive metal (iron) / non-magnetically sensitive metal (aluminum... etc.)
- Accuracy :±10 at 0~199μm
- Resolution :1μm
Includes battery, calibration disks, instructions and leather belt case This model works with Non-Ferrous material such as Aluminum, as well as ferrous/steel/iron base metals. It does not work with plastics though.
These are typically used by auto detailers to check thickness of paint prior to sanding/buffing etc, and by car dealers to check the relative thickness of the paint from panel to panel, thus indicating if the vehicle has been repainted at any time.
Specification:
Measurement Range - 0-40 mils/0-1000 μm
Accuracy - ±4 digits on 0 to 7.8 mils ±10 digits on 0 to 199 μm ±(3% + 4 digits) on 7.9 - 40 mils ±(3% + 10 digits) on 200 - 1000 μm
Temperature Coefficient - ±0.1% of reading change in accuracy per degree change in ambient operating temperature above 82.4° F or below 64.4° F
Auto power-off after 30 seconds
Response Time - 1 second
Battery Requirement - 9V
Calibration Plate - 2" diameter steel disc
Gauge Controls - Calibration, Up-arrow, Down-arrow, Back Light, and mils/um







