TCP Global 2.5 Gallon (10 Liter) Heavy Duty Steel Pressure Pot Paint Tank, Clamp on Lid, Regulator, Gauge, Spray Gun, and 10 Foot Hose Assembly - Pressure Pot for Epoxy Resin, Painting, & Autobody
Product Description
TCP Global 2.5 Gallon (10 Liter) Heavy Duty Steel Pressure Pot Paint Tank, Clamp on Lid, Regulator, Gauge, Spray Gun, and 10 Foot Hose Assembly - Pressure Pot for Epoxy Resin, Painting, & Autobody
- All-in-One Painting Kit: This setup includes a 2-1/2 gallon (10 liter) heavy-duty steel pressure pot, clamp-on lid, regulator, pressure gauge, spray gun, and hoses for a comprehensive solution
- Heavy-Duty Spray Gun: Features a pressure feed spray gun with a 1.5mm fluid tip for precise, efficient spraying. A 10-foot air and fluid hose assembly is also included.
- Sealing & Pressure: The clamp-on lid with a gasket provides a tight seal, helping prevent leaks and supporting reliable operation. Working pressure: Recommended 25-30 psi; Air inlet/outlet: 1/4"; Fluid outlet: 3/8".
- Large-Volume Tasks: Designed for large volume painting and autobody work. Provides consistent performance and reliability for demanding situations.
- Broad Coating Compatibility: Suitable for a wide range of coatings including automotive, oil-based, latex, varnishes, lacquers, primers, wood coatings, and adhesives.
Excellent for Production Painting or Situations where a large amount of spraying is required such as Commercial Trucks, Vans, Buses or for Architectual and Industrial Finishing. The Spray System gives you the benefit of storing a large volume of paint that can be applied rapidly, saving you time and money. Can be used with a broad range of coatings like Automotive, Oil Based, Latex, Varnishes, Primers, and More
Heavy Duty Pressure Feed Spray Gun Specifications:
- Standard Nozzle: 1.5 mm
- Operating Pressure: 50 PSI (3.0 bar)
- Pattern Width: 7.1 in. to 9.1 in. (180 to 230 mm)
- Air Consumption: 6.0 to 8.8 CFM (170-250 l/min)
Heavy Duty Pressure Feed Paint Tank Specifications:
- Paint Pot Capacity: 2-1/2 Gallons (Aprox. 10 Liters)
- Clamp on Lid with Gasket
- Fluid pressure regulator with gauge
- Paint Tank Operating Pressure: Optimal 25-30 PSI
- Hose Assembly: 10 foot Air and Fluid Hoses
- Air inlet: 1/4 in. Fluid inlet: 3/8 in.
- Air Pressure Relief Valve for Safety
- Includes Instruction Manual and a One Year Warranty
Technical Specifications
You might also like
Box of 10 Devilbiss Binks 2.7 Gallon Paint Pressure Feed Pot Tank Liners (#PT-52-K10, 10 Liners)
Master Pro Series 25 Foot Air and Fluid Hose Assembly Set with Fittings for Spray Guns, Paint Pressure Pot Tanks, Professional Heavy Duty - Air Hose 3/8" NPS, 5/16" ID - Fluid Hose 1/4" NPS, 1/4" ID
Ouya R77P Paint Sprayer Pressure Feed Large Area Painting Spray Gun Nozzle Size 2.0mm
Ouya R77P Paint Sprayer Pressure Feed High Efficiency Spray Gun Nozzle Size 2.5mm
Paint Pressure Pot Tank Lid Replacement Rubber Gasket for 2.5 to 2.8 Gallon (10 Liter) Paint Pressure Tanks
Neiko 30252A Water and Oil Separator for Air Line, 1/4" NPT Inlet and Outlet, 90 psi
TCP Global 2 Quart Paint Pressure Pot with Spray Gun and 5 Foot Air and Fluid Hose Assembly
TCP Global Commercial 2.5 Gallon (10 Liters) Spray Paint Pressure Pot Tank with Manual Mixing Agitator
Ouya Spray Gun Pressure Feed Paint Sprayer Nozzle Size 1.5mm, Silver