Steelsoft DIY Hose Clamp System Kit - 9.8 FT Band + 6 Fasteners, 304 Stainless Steel Pipe Clamp, Large Adjustable for Ductwork, Pole Mount

Steelsoft DIY Hose Clamp System Kit - 9.8 FT Band + 6 Fasteners, 304 Stainless Steel Pipe Clamp, Large Adjustable for Ductwork, Pole Mount

• DIY Hose Clamp: Nothing like the freedom to determine your own screw clamp sizes and still have enough material left, come in handy for other future projects. Trim the strap in suitable length, insert the fasteners and get small or large hose clamp options from 2.5'' to 37''max diameter.
• Super Easy To Use: In our 2nd image, you can read the diagram manual! Only a snip/plier and a screwdriver needed. If you have no a snip on hand, please use a plier to bend the strap up and down repeatedly, it will be cut easily! Make an adjustable hose clamp as you want!
• Cost Effective: Our hose clamp kit makes it much more cost effective and flexible than ordering a variety of pre-made worm clamps. You can make band hose clamps in odd sizes such as 10 inch, 12 inch, 14 inch, 16 inch, 18 inch, 20 inch, 24 inch, 30 inch and so on. Round and polygonal shapes are all available.
• Smooth Worm Gear Clamp: Our fastener steel is thicker than tradition, which is not easily bent when making the hose clamp tight! We used the best quality screws which can grip the strap band tightly and keep smooth driving when turning the screwdriver! There is no hard pressure to apply!
• All 304 Stainless Hose Clamps: The strap roll 9.8 FT and 6 PCS fasteners are all made of real 304 SS, not 201 SS, anti-rust and anti-salt, very suitable for outdoor use and coastal areas. The stainless steel hose clamps can be reusable after you release it again. Last forever! Separated fasteners can be purchased in our Amazon store.
• The separated hose clamp fasteners can be purchased in our Amazon store.