Small Engine Tachometer，Digital Tachometer，RPM Meter and Hour Gauge

Small Engine Tachometer，Digital Tachometer，RPM Meter and Hour Gauge

• Engine Tachometer: Easy to installed with its bracket, which is firm and stable and can be fixed on any tubular object. This tachometer is equipped with clips, just clamp the spark plug wire with the clip to receive the signal, safe and reliable. No external power connections are required, long service time. The tachometer has a battery power detection function. When the battery shows low, please replace the battery in time. Remove the bracket and open the battery door to replace the battery. The data is memorized and the data will not be lost when replacing the battery.
• Digital Tachometer: TOT, JOB, SVC, MAX RPM, RPM mode setting, RPM Alarm, CLOCK, Battery and memory function, Auto sleep and Reset. Also supports wireless sensing, optimal sensing distance 3cm-5cm. Widely used in hand-push mower, weed whacker, motorcycle, off-road vehicle, beach car, snowmobile, etc. Induction tachometer suitable for any gasoline engine.
• RPM Tachometer : 0-18,000rpm, RPM accuracy: ±10rpm; Timing Range: 0-9999hours,Timing accuracy: 0.1H. Refresh Rate: 0.5s. Wire Length: Approx. 2.2M. Screen Size: 40*22mm. (optimal sensing distance 3cm-5cm).
• SVC: Maintenance coutdown timer.The default time of SVC is 50H, and the setting In SVC interface, press the "S" button to enter the settings. Press the " M " or "S" to increase or decrease the data. range is 0-500H. Press and hold the M and S keys simultaneously for 5 seconds to reset and restore to factory settings.
• Backlight Engine Tachometer Hour Tachometer: Default green backlight will help to use it at night or dim place, Red backlight will remind when the engine RPM is higher than the set RPM alarm value. RPM alarm value is programmable.