Single axis fingertip Joystick Controller, Industrial Remote Control Handle 1 axis Joystick, Compact Hall Effect Joystick

Single axis fingertip Joystick Controller, Industrial Remote Control Handle 1 axis Joystick, Compact Hall Effect Joystick

• ELECTRICAL SPECIFICATIONS：Output Voltage Range: 0V-0.5V-2.5V-4.5V, Power Supply: 5 V ±0.5 Vdc, <30 mA, Overvoltage max: +24 Vdc, Output impedance: 10 Ω. (The Output type Option A is in stock, please make sure if it matchs your machine before purchasing, And Output type option B requires customization)
• MECHANICAL SPECIFICATIONS：Operating Force: 3.4 N(0.76lbf), Maximum Load: 50 N(11.24lbf), Mechanical Angle of Movement: ±30° X axis, Expected Mechanical Life: 5 million lifecycles, Mass/weight: 45 g (1.59 oz) nominal, Lever Action (centering): Spring
• CONNECTIONS: The industrial joystick is fitted as standard, for details on pinout configuration, please refer to attached imaging.
• ENVIRONMENTAL SPECIFICATIONS：Operating Temperature: -30 °C to +70 °C， Storage Temperature: -40 °C to +85 °C，Sealing: IP67 (above panel subject to handle and final specification)
• MOUNTING: Slotted mounting holes of the thumb joystick should be L25.5 mm, W12.5 mm. The panel thickness should <4mm. When mounting the joystick, care should be taken to site it in a position that does not make it vulnerable to damage when in use. The joystick parts on the underside of the panel, must not be exposed to excessive humidity or dust.