Single Mode LC Gigabit Fiber to Ethernet Media Converter, LC SFP Included

Single Mode LC Gigabit Fiber to Ethernet Media Converter, LC SFP Included

Product ID: B07CXRL34L Condition: New

$ 167
includes Duties & VAT
Delivery: 10-20 working days
Ships from USA warehouse.
Secure Transaction
VISA Mastercard ozow

Product Description

Single Mode LC Gigabit Fiber to Ethernet Media Converter, LC SFP Included

  • SINGLE MODE 1310 NM, 20 KM / 12.43 MILES - THE LC SFP MODULE IS ALREADY IN IT - A 1000Base-LX single-mode LC transceiver ships fitted, so the unit links out of the carton on OS2 9/125 duplex single-mode fiber. Nothing to source and nothing to match. The cage is a standard SFP and the module is hot-swappable if the run changes.
  • AUTO-SENSING COPPER: 10, 100 AND 1000 MBIT - The RJ45 port negotiates 10Base-T, 100Base-TX and 1000Base-T automatically against whatever you plug in - a switch, a camera, an NVR, a router or a laptop - with auto MDI/MDI-X so a crossover cable is never needed. IEEE 802.3 / 802.3u / 802.3z / 802.3ab.
  • DUAL-SPEED FIBER, SET ON THE DIP SWITCH - Select 1000Base-LX (default) or 100Base-LX on the rear DIP block, so the converter drops into an existing 100 Mbit fiber plant as easily as a gigabit one. The same block carries LFP on/off, broadcast storm control, and forced speed on both the fiber and the copper port.
  • LLF AND JUMBO FRAMES - LINK FAULT PASS-THROUGH THAT ACTUALLY TELLS YOU - With LFP enabled, a break on the fiber side drops the copper link too, so the switch at the far end sees the fault instead of holding a dead port up. Jumbo frame support keeps end-to-end TCP throughput intact on storage and backup traffic.
  • WHAT YOU GET: - Converter, the 1310 nm LC SFP module already fitted, 5 V AC/DC power adapter, a Cat6 patch cable, wall-mount ears and a cable clip. Everything needed for one end of the link. Most converters at this size ship the unit and a power brick, and leave the patch cable to you.
  • DESKTOP OR WALL, RUNS COOL, 0 TO 70 C - 94 x 70.5 x 26.5 mm, fanless, 5 V DC from the included 100-240 VAC adapter. Rated 0 to 70 C (32 to 158 F), wider than most indoor converters. LEDs for Power, Link/Activity, Full-Duplex and Speed give per-port state at a glance. Mounts flat on a desk or on a wall with the ears supplied.

fiber media converter single mode , fiber media converter , fiber media converter singlemode , single mode , singlemode , media converter , converter media , fiber media converter single mode lc , fiber to ethernet converter , media converter fiber to ethernet , sfp to rj45 , lc to rj-45 , lc media converter , ethernet to fiber , fiber optic converter , gigabit ethernet media converter , gigabit fiber converter , fiber optic to ethernet converter , sfp media converter , single mode fiber converter , singlemode media converter , fiber optic to ethernet converter , single mode fiber media converter , single mode fiber to ethernet converter , fiber converter single mode , fiber media converter single mode , single mode to ethernet , gigabit media converter auto single mode , fiber to ethernet converter single mode , fiber to ethernet converter 1000 , gigabit single mode fiber ethernet converter , fiber to ethernet single mode media converters , fiber media converter single mode lc , lc fiber media converter single mode , network to single mode fiber , fiber converter copper Extend your Gigabit or Fast Ethernet Network Over Single Mode Fiber Up to 20 km (12.42 miles) using 1310 nm With Ease AN-UM-SMC-AS-J+SM-SFP-KIT Single Mode Fiber Media Converter Will Automatically Detect 10 Mbit/s or 100 Mbit/s Fast Ethernet or 1000 Mbit/s Gigabit port Supports Jumbo Ethernet Frames up to 9000 bytes (if needed, configurable by dip switches); Supports QinQ and VLAN's - MTU size big enough to pass them through; One 1000Base-LX Single Mode Dual Fiber port Port with LC type connector - up to 20 km (12.24 miles) distance using 1310 nm wavelength One 10/100/1000Base-T RJ-45 port Autosensing featured - adapts to all 3 speeds! Compliant with IEEE 10/100/1000Base-T and 1000Base-LX Connect it to Gigabit or Fast Ethernet ports or even 10Mbps ports When used standalone (paired with other devices), be sure to check that wavelengths match - 1310 nm used in these converters.

Technical Specifications

Country
USA
Brand
ADnet
Manufacturer
AD-net Technology., CO LTD
PartNumber
AN-UM-SMC-AS-J + SM-SFP-kit
Model
AN-UM-SMC-AS-J + SM-SFP-kit
Color
Single Mode 12.42 mi (20 km) LC
Height
1.043305
Length
3.70078
Weight
0.88
Width
2.7559
Size
Gigabit Autosensing 10/100/1000