SharkBite UC526LFA Pex Swivel Adapter, 1/2" x 1/2", Brass
Product Description
SharkBite UC526LFA Pex Swivel Adapter, 1/2" x 1/2", Brass
- Barb system offers lowest material cost
- Resists corrosion and scale build up
- No waiting for glue to dry or joints to cool
- Barb system offers lowest material cost
- No waiting for glue to dry or joints to cool
1/2" Lead Free Brass Barb Insert x 1/2" Female Pipe Thread Swivel Plastic Nut Faucet Adapter, For Connecting 1/2" Cross Link Polyethylene Pex Tubing To 1/2" Male Iron Pipe Thread Faucet Shank, Secure Barb End Of Fitting To Pex Pipe With TV #608-933 Cinch Clamps and TV #608-743 Cinch Tool, Or Copper Crimp Rings and Crimp Tool, Immediately Testable To Well Over 100 PSI, Meets The New NSF/ANSI Standard 14-2009 and ASTM F 1807-9SI Standard For Products Intended For The Transport Of Potable Water, ANSI/NSF Standard 61 Annex G For Lead Free Compliance and The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 0.25% Of Lead By Weight To Meet AB1953 California and VT S152 Vermont Low Lead Restrictions.
Technical Specifications
You might also like
SharkBite UC532LFA Swivel Elbow, 1/2-Inch by 1/2-Inch
SharkBite UC120LFA Threaded Male Adapter, 1/2-Inch by 1/2-Inch
Oetiker 62318 Metal Stainless Steel Pex Clamp, 0.5" Size (Pack of 50)
1/2 inch Pex Tee 1/2" Tees "T" (pack of 8) Brass Crimp Fitting / Fittings (PEX-T-222)
SharkBite UC334LFA Drop Ear Elbow, 1/2-Inch by 1/2-Inch
SharkBite UC362LFA Tee, 1/2-Inch by 1/2-Inch by 1/2-Inch
SharkBite 23102CP25 Crimp Rings, 1/2-Inch
SharkBite 22461LF Ball Valves, 1/2-Inch
IWISS PEX CINCH Crimping Tool Crimper for Stainless Steel Clamps from 3/8"to 1" with 1/2" 20PCS and 3/4" 10PCS SS PEX Clamps
SharkBite U701 PEX Tubing Cutter 1/4-Inch, 3/8-Inch, 1/2-Inch, 3/4-Inch and 1-Inch