Sevenjungle 2 Inch 45 Degree PVC Elbow Fittings, SCH40, Fits 2.375 in OD

Sevenjungle 2 Inch 45 Degree PVC Elbow Fittings, SCH40, Fits 2.375 in OD

• CHECK YOUR PIPE SIZE FIRST: These 2 inch PVC elbow fittings are made for SCH40 pipe with a 2.375 inch outside diameter. Measure your pipe OD before you order, because a loose socket will not hold a glued joint tight under a real load.
• 38 CM SOCKET DEPTH: Each socket accepts up to 2.38 cm (about 0.94 in) of pipe, so you can mark the insert line before you glue. Push the pipe in until it bottoms out and the elbow sits square on your layout with no guesswork about depth.
• SMOOTH 45 DEGREE TURNS: A 45 degree elbow eases the bend better than a sharp 90, so runs turn with less strain and fewer tight corners. Build garden frames, greenhouse hoops, shelf units and storage racks with one clean, even angle.
• GLUE IT OR DRY FIT IT: Both ends are plain sockets with no threads to strip. Solvent weld them with primer and PVC cement for a permanent joint, or dry fit the whole layout first and glue only once the frame lines up the way you want.
• 2 PCS IN ONE BOX: You get 2 white 2 inch PVC 45 degree elbow fittings, enough for a quick repair or a small shelf build without buying a full box. Keep the spare in your kit for plant supports, drain line fixes and weekend projects.