Seamax Pro Repair Kit for Inflatable Boat (250ml 2 Part Hypalon Glue, Glue only)
Product Description
Seamax Pro Repair Kit for Inflatable Boat (250ml 2 Part Hypalon Glue, Glue only)
- Sealed in 2 aluminum bottles. Mix before use. For Boat Repair or Parts Installation
- Patch Material - Red, Black, Gray, Dark Gray, Size: 4x6" & 4" Round Patch
- Glue, glue hardener, paint Brush, optional patch material
- Instruction of Glue Layer applied: 1-2 layers on new fabric surface; 2-3 layers on old fabric surface; 3-4 layers for wood or plywood surface; 2-3 layers for parts or aluminum surface. (The fabric of Hypalon boat, it must has a coating layer on the fabric, sanding the boat fabric to get rid of this coating is a must before gluing.)
- Only mix the amount of glue you require for the repair. Seal the bottle right away and store it in a cool area so that it may be used again. If the hardener turns to crystals or gets sticky, it is no longer usable. To clean the area that needs to be repaired, use Methyl Hydrate, Acetone or MEK.
Instruction
Package provides 2 part glue. Mix 5% hardener into the glue before use. Max mix 10% hardener when in Cold Weather 10C-15C or when High Humanity 50-75%.
For the best results when gluing, the relative humidity should be less than 60%, ambient air temperature should be between 18C to 25C (65 F to 77F) and not in direct sunlight. Clean the patching area on the boat as well as the contact side of the patch, best to be with M.E.K. (Methyl Ethel Ketone) patching solvent and cleaner. Keep solvent off skin. After applying the solvent, you will notice that the area will become tacky. This tackiness ensures good glue adhesion.
We suggest using small painting blush to apply 2layers glue in both surface, wait 5-10 minutes to dry and attach those layers together with pressure. Wait 48 hours before boating.
Store the Glue in cold place. Keep out of Reach of Children. Product has 2 years limited warranty.





