SABRENT M.2 SATA (NGFF) to 2.5in SATA Adapter Enclosure, Not NVMe (EC-M2SA)
Product Description
SABRENT M.2 SATA (NGFF) to 2.5in SATA Adapter Enclosure, Not NVMe (EC-M2SA)
- NOT FOR NVMe OR PCIe DRIVES: This adapter accepts M.2 SATA (NGFF) SSDs only. It does NOT support M.2 PCIe NVMe or M.2 PCIe AHCI drives. Check the label on your SSD before you order — if it says NVMe or PCIe, this is not the housing for it.
- Wide Device Compatibility: Compatible with M.2 SATA (NGFF) SSD and SATA-enabled host devices such as Desktop and Laptop computer systems and Hot Swap 2.5 inch SATA Bays
- TURNS AN M.2 SATA SSD INTO A 2.5IN DRIVE: Converts an M.2 SATA NGFF SSD into a standard 2.5in SATA III 6Gbps drive with a standard 22-pin SATA connector, for desktops, laptops and hot-swap 2.5in SATA bays.
- ENCLOSED HOUSING PROTECTS THE DRIVE: A two-part interlocking housing secures your M.2 SSD and shields it once installed, so a bare card becomes a drive you can handle, mount and swap like any other 2.5in SSD.
- Complete Package Contents: Includes SABRENT M.2 SSD Enclosure, mounting screws with screwdriver, and user manual for easy installation and setup
There has never been an easier way to convert your M.2 SSD into a standard 2.5"" SATA III SSD. The Sabrent EC-M2SA is the perfect solution to expand the connectivity of your M.2 drive in just a few easy steps! ◠Enclosure provides added protection to your SSD drive. ◠Maximize your performance. ◠Easily convert an M.2 NGFF solid-state drive into a Standard 2.5in SATA III 6Gbps SSD. ◠Compatible with M.2 NGFF SSD and SATA-enabled host devices such as Desktop & Laptop computer systems and Hot Swap 2.5 in SATA Bays. ◠Support M.2 form factor: 22x30, 22x42, 22x60, 22x80. ◠B-key M.2 SSD. ◠Standard SATA 22pin connector. Directions: The EC-M2SA is a 2-part housing that interlocks and secures once your drive is inserted. With the housing apart: 1. Gently attach your M.2 drive into the housing and connect to the M.2 adapter. (show picture of connectors) 2. Once secure, connect the 2 housing pieces (show the housing being put together) 3. Secure the housing with the supplied screws (show screwing the housing together) 4. You are ready to go! Package Contents: ◠Sabrent M.2 SSD. ◠Screws + Screw Driver. ◠User manual. Please Note: ◠It doesn’t support M2. NGFF-PCI-E. ◠The product does not contain SSD hard disk
Technical Specifications
You might also like
Sabrent mSATA to 2.5-Inch SATA III Aluminum Enclosure Adapter (EC-MSSA)
Sabrent USB 3.0 to SSD / 2.5-Inch SATA I/II/IIIHard Drive Adapter (EC-SSHD)
WD Blue 3D NAND 500GB Internal PC SSD - SATA III 6 Gb/s, M.2 2280, Up to 560 MB/s - WDS500G2B0B
Micron 5100 ECO 960 GB Internal Solid State Drive - SATA - M.2 2280
StarTech.com M.2 SSD to 2.5in SATA Adapter - M.2 NGFF to SATA Converter - 7mm - Open-Frame Bracket - M2 Hard Drive Adapter (SAT32M225)
SSK Aluminum M.2 NVME SSD Enclosure Adapter, USB 3.1 Gen 2 (10 Gbps) to NVME PCI-E M-Key Solid State Drive External Enclosure (Fits only NVMe PCIe 2242/2260/2280)
M.2 NGFF SATA SSD to 2.5" SATA Enclosure, Mini PCIe SSD Adapter SATA to mSATA Only Support B & M Key SATA Based NGFF M.2 SSD Converter to 2.5 Inch SATA 3.0 Card Support 2230 2242 2260 2280 2.5 SATA
ORICO 2.5 to 3.5 Hard Drive Adapter HDD SSD Mounting Bracket Tray for 7/9.5/12.5mm 2.5 Inch HDD/SSD with SATA III Interface
Samsung 860 EVO SSD 500GB - M.2 SATA Internal Solid State Drive with V-NAND Technology (MZ-N6E500BW)
QNINE NVME PCIe Adapter, M.2 PCIe NVMe SSD M Key to PCI Express 3.0 x2 Expansion Card with Low Profile Bracket for PC Desktop