SBS - "No Tool" Stainless Steel Fin Screw for Longboard and SUP - 3 Pack
Product Description
SBS - "No Tool" Stainless Steel Fin Screw for Longboard and SUP - 3 Pack
- NO-TOOL FIN ADJUSTMENT: Oversized finger-grip head lets you install, remove, or reposition your center fin by hand without carrying a screwdriver.
- STANDARD CENTER FIN BOX HARDWARE: M4-0.7 threaded screw and sliding plate designed for many traditional longboard and SUP center-fin boxes that use a screw-and-plate mounting system.
- CHECK LENGTH BEFORE ORDERING: Thread length is 19 mm (0.75 in). Plate measures approximately 14.3 x 14.3 mm (0.56 x 0.56 in) and 3.5 mm (0.14 in) thick. Compare with your current fin hardware before ordering.
- NOT UNIVERSAL: Some boards with deeper fin-box setups require a longer screw. Certain Starboard, Naish, and other board models may not be compatible. Check your existing screw length and mounting style first.
- CORROSION-RESISTANT STAINLESS STEEL: Made from 316 stainless steel for use around fresh and salt water. Available in 2-pack and 3-pack options so you can keep spare fin hardware on hand.
Never again need a screwdriver to install, adjust, or remove your longboard fin or stand up paddleboard fin. Originally designed for the iSup market, The "No Tool" longboard screws and plate hold your center fin in place just as before, but are tightened by hand and held in place by the spring force of an o-ring. Be overjoyed by never needing a screwdriver, being able to adjust your fin position mid-session, and spending more time on the water, if that be on your SUP board, inflatable SUP or a 9'0" noserider. Whether you are the type to call it is a skeg or a fin, we got you covered. These are quality built, with clean edges and smooth threads. Dimensions of plate fit all standard fin boxes. All Santa Barbara Surfing products are quality built, no fluff gear to get out on the water. Rider tested on world class point breaks, our mission is to spread quality gear far and wide to our water sliding friends. Compare this to the E-Z Bolt, Wonderbolt, Quick Fin Release (QFR) or Thumbscrew versions. Note: These are not compatible with Starboard or Naish brand paddle boards.
Technical Specifications
You might also like
SBS 10" Surf & SUP Fin - Free No Tool Fin Screw - 10 inch Center Fin for Longboard, Surfboard & Paddleboard
Santa Barbara Surfing SBS Surfboard Single Fin Box 10.5 Inch
SBS - Stainless Steel Longboard Fin Screw & Plate - Pack of 3
Santa Barbara Surfing SBS - 9 inch Longboard & SUP Single Fin - 9" Center Fin for Surfboard & Paddleboard (Black)
SBS 8" Longboard & SUP Single Fin - Free No Tool Fin Screw - 8 inch Center Fin for Surfboard & Paddleboard
SBS Surf Fin Key and Screws for FCS Fins (3 Keys & 12 FCS Screws)
Future Fins - Large White Thermoflex Keel SUP Fin Stand Up Paddleboard
Solstice by Swimline Quick Release SUP Skeg
Solarez UV Cure Epoxy Ding Repair Resin (2 oz) w- 60/40 grit Sand pad ~ SUP Paddle-Board & Surfboard Repair ~ No Yellowing, Eco-Friendly (Zero Vapors) Made in The USA
BPS 2-Piece Side Bites Fins - Glass Flex Surf Fin Set (FCS GL Style) - Side-Bites for 2+1 Setup Longboard, Surfboard, or SUP - Comes with Waxcomb (Classic Black)